Automotive Underbody Shield Automation with ALFA New Titan Robots
Are you concerned that large, thin-walled plastic components, such as underbody shields, bumper, large trim panels, are prone to deformation during demolding and unstable parts removal? Are you looking for an automation solution to address issues such as drag marks, warping and substandard appearance in these plastic parts?
This is exactly the kind of problem ALFA robots are built to solve — we will develop a dedicated automated part-removal solution for you, backed by real production cases.
Warping on Demolding? Thin-Wall Parts Don't Have to Be Scrap.
Let's see how ALFAROBOT TN1700WS-S3 handles Thin-Wall Moldings.
Large, thin-wall moldings such as underbody shields, bumpers and large trim panels are inherently difficult to demold. The wall thickness is typically only 3–4 mm, while the part itself is often over a meter long. During ejection, any uneven force distribution will result in visible defects, whether it comes from manual handling or a mismatched end-of-arm tool. Drag marks, stress whitening, and warpage, even slight distortion mean the part is scrap, as these parts must meet Class-A appearance standards.
ALFA has delivered an underbody shield removal solution for an automotive parts manufacturer. The injection molding machine was paired with ALFA New Titan full servo series—TN1700WS-S3. All three axes are driven by AC servo motors, ensuring smooth interpolated motion and gentle acceleration and deceleration that minimize inertial impact at the moment of part release. The end-of-arm tooling was built specifically for the part: a customized multi-point vacuum cup array, working with a locating fixture, spreads holding force evenly across the entire part surface.
This ensures uniform stress distribution across the thin-wall section, eliminating drag marks and warpage and meeting the strict cosmetic standards for automotive components. Because the customer runs more than one part on the line, each end-of-arm tool is built to the specific part geometry, so changing over is simply a matter of swapping tools — no need to engineer a new solution from scratch. This saves cost and keeps the process simple.
Parts Over a Meter Long? A Short-Stroke Robot Will Stall the Line.
Up to 6000 mm Traverse: ALFA New Titan Series Was Built for Long Parts.

The ALFA New Titan series was developed specifically for removing long, large-area plastic parts and covers injection molding machines from 800 to 4000 tons. Different models meet different stroke requirements, with traverse strokes of up to 6000 mm. No more worrying about removing large parts — long-format moldings are covered in a single pass. The series is widely applicable to large parts such as bumpers, instrument panels, door trim panels, radiator grilles, mudguards, and air deflectors.
Losing Seconds After Every Mold Opening? That's Your Hidden Bottleneck.
16% More Output-Without Adding a Single Operator
Alfa robot deep integration with injection molding machine signals enables simultaneous actions within a cycle, allows for refined optimization of part extraction and material transfer sequencing, and eliminates hidden waiting periods after mold opening; together, these features provide the core support for enhancing production capacity and efficiency. Verified over time on the automotive underbody shield project, output increased by 16%, giving the plant a real competitive edge.
Injection molding automation is not about replacing operators. It is about matching the right robot to the actual molding conditions so that the machine's built-in capacity can finally be realized. If unstable part removal, cycle time, or throughput is holding your line back, contact us with your molding conditions, machine tonnage, and part drawings — we will develop a dedicated automated part-removal solution for your application.
Alfa Industrial soul thought - professional quality, put product quality in the first place. Whether it is the procurement of parts in the early stage or the final machine inspection, Alfa Industrial strictly monitors every link, every process and every detail to ensure the stability and performance of each machine.
"Alfa Industrial" was founded in 1988 by the founder and chairman of the group, Mr. Shi Fuxing. Since its inception, the company has been operating with the belief of “Tian Xingjian, gentleman to self-improvement”, and at the same time, to serve every customer with the concept of “integrity, enthusiasm, creativity and excellence”. In the process of enterprise growth in the past 30 years, Alfa Industrial has expanded its business automation system integration, CNC machining center, injection molding equipment, and environmental dust collection by the injection molding machine-specific manipulator. R&D and manufacturing in various industrial fields such as equipment. Our group has a large factory in Dongguan (starting in 2001) and Suzhou (beginning in 2004) with a total investment of RMB 400 million, a total land area of 160,000 square meters and a staff of approximately 1,200. In terms of marketing, it adopts a nationwide “direct mode”, which employs professional business representatives and technicians to provide direct and fast service to customers. Currently, there are 100 marketing offices. Since the development of Alfa Industrial, there have been more than 10,000 customers at home and abroad! Continuous research and innovation, providing customers with high-quality products and overall solutions with highly mature technology, rich experience, perfect service and reasonable price, and won unanimous praise and affirmation from all walks of life at home and abroad.