English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
LD/LLDPE Super High Speed Inflation Machine (GF-L85ES)
Categories : Blown Film Extruders
The GF-L85ES is the largest of the three GF-L ES super high speed blown film lines for LD and LLDPE film. It is specified for a maximum film width of 2200 mm and a maximum capacity of 240 KG/HR, using an 85 mm screw, a 100 HP driving motor and a 500 mm blown film die, with 8 ZONES of temperature control on the panel. The GF-L55ES and GF-L65ES cover the narrower widths in the same series.The tower fixed take-up unit has a 2300 mm roller width and runs at Max. 60 M/Min, and the single-station surface friction winder changes bobbins semi-automatically by pneumatic system. The same option list as the rest of the ES series applies, including stacked air ring, width control, corona treater, EPC or CPC edge control, oscillating take-up, double station winder, auto tension control, hydraulic unloading, heat-slitting, a second gusset unit, an in-line bag making or printing machine, and an edge-trim on-line re-use system for returning trim to the extruder.Material: LD/LLDPEMax. film width: 2200 mmMax. capacity: 240 KG/HRExtruder: 85 mm screw, 100 HP driving motor; 500 mm blown film dieTemperature control: 8 ZONESTake-up: tower fixed type, 2300 mm roller width, Max. 60 M/MinWinding: single station surface friction type, semi-auto pneumatic bobbin changeOptions: stacked air ring, width control, corona treater, EPC/CPC, oscillating take-up, double station winder, hydraulic unloading, heat-slitting, in-line bag making/printing, edge-trim re-use
LD/LLDPE Super High Speed Inflation Machine (GF-L65ES-1)
Categories : Blown Film Extruders
The GF-L65ES-1 belongs to the GF-L ES super high speed series for LD and LLDPE film, positioned above the standard GF-L line for wider film and higher output. In the 65 mm size the line is rated for a maximum film width of 1600 mm and a maximum capacity of 180 KG/HR, with a 65 mm screw driven by a 75 HP motor and a 350 mm blown film die. Temperature is controlled in 7 ZONES from the control panel.The take-up unit is a tower fixed type with a 1600 mm roller width and a take-up speed of Max. 60 M/Min. Winding is single station, surface friction type, with semi-automatic pneumatic bobbin change. The option list is extensive: auto loader, pressure gauge, die rotating unit, LD/LLDPE die and air ring, stacked air ring, width control, corona treater, embossing roller, air chiller, vertical or horizontal oscillating take-up, edge or center position control (EPC or CPC), manual winder with air shaft, double station winder, auto tension control, hydraulic unloading, heat-slitting, second gusset unit, in-line bag making or printing machine, edge-trim winder and an edge-trim on-line re-use system.Material: LD/LLDPEMax. film width: 1600 mmMax. capacity: 180 KG/HRExtruder: 65 mm screw, 75 HP driving motor; 350 mm blown film dieTemperature control: 7 ZONESTake-up: tower fixed type, 1600 mm roller width, Max. 60 M/MinWinding: single station surface friction type, semi-auto pneumatic bobbin changeOptions: stacked air ring, width control, corona treater, oscillating take-up, EPC/CPC, double station winder, auto tension control, in-line bag making/printing, edge-trim re-use
LD/LLDPE High Speed Inflation Machine (GF-L55)
Categories : Blown Film Extruders
The GF-L55 is a single-layer blown film line for LD and LLDPE (low density and linear low density polyethylene). It sits in the middle of the GF-L series, which runs from the GF-L35 up to the GF-L65, and is configured for producing polyethylene film for bags and packaging at a maximum film width of 1000 mm. The extruder uses a 55 mm screw driven by a 40 HP motor with inverter control, feeding a 200 mm die fitted with a dual-lip air ring.Rated output is 90 KG/HR. The line is controlled from an independent switch board, and film is taken up on a 1100 mm roller width and wound on a single-station manual surface winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, HDPE dies and air ring, flying knife, second-station winder, air shaft and air chiller, so the same base machine can be specified for HDPE or for downstream printing.Material: LD/LLDPEMax. film width: 1000 mmExtruder: 55 mm screw, 40 HP motor with inverterDie: 200 mm with dual-lip air ringMax. capacity: 90 KG/HRRoller width: 1100 mm; single-station manual surface winderOptions: auto loader, manual screen changer, die rotating unit, corona treater, HDPE dies/air ring, 2nd station winder, air chiller
LDPE Double Layer Film Blowing Machine
Categories : Blown Film Extruders
Features Application: Agriculture film, construction film, water pouch, garbage bag etc Suitable material: LDPE / LLDPE (HDPE by request) Film layer: 2 layer Screw L/D ratio: 30:1 Motor direct connection type gearbox PID+SCR temperature controller ABB or HITACHI inverter
