English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
JIT Shopping Bag Making Line (JIT Series)
Categories : Bag Making Machine by Applications
The JIT Series is JANDI'S in-line shopping bag making line. Blown film extrusion, printing and bag making run as one continuous process, so resin enters at one end and finished, printed shopping bags leave at the other; there are no intermediate film rolls to store, transport or re-load. This listing covers the series as a whole, which is offered in mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and a two-colour full-automatic type.Because the steps are linked, JANDI'S describes the line by what it removes from a conventional three-machine set-up: separate handling between extrusion, printing and bag making, the floor space and storage for film rolls, and the die-cut scrap, which is recovered on-line and fed back. Line composition, printing configuration, bag size and output are configured with the buyer at quotation.Type: in-line shopping bag making line, JIT SeriesProcess: blown film extrusion, printing and bag making in one lineConfigurations: mono-layer semi-auto, mono-layer full-auto, ABA full-auto, two-colour full-autoSingle-side printing configuration, colour count confirmed at quotationDie-cut scrap recovered on-lineNo intermediate film roll storage between stepsLine composition, bag size and output configured at quotation
T-Shirt Bag Making Line (JIT-45D)
Categories : Bag Making Machine by Applications
The JIT-45D is the 2-Color T-shirt Bag Making Line in JANDI'S JIT series. Rather than a stand-alone bag machine, a JIT line links blown film extrusion, printing and bag making into one in-line process, so that resin enters at one end and finished, printed T-shirt bags leave at the other without intermediate film rolls being stored and re-handled. The 45D designation identifies the two-color printing configuration of the line.The JIT series is offered in several configurations — mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and the 2-color full-automatic type represented by the JIT-45D — so the line can be matched to the film structure and print requirement of the bag. Line composition, film width and output are configured with the buyer at quotation, and the specification table below lists the models in the series.Type: T-shirt bag making line, in-line blown film, printing and bag makingConfiguration: 2-Color full-automatic typeModel: JIT-45DSeries alternatives: mono-layer semi-auto, mono-layer full-auto, ABA full-auto typesLine composition and output configured at quotation
T-Shirt Bag Making Line (JIT-55)
Categories : Bag Making Machine by Applications
The JIT-55 is the mono-layer semi-automatic type in JANDI'S JIT T-shirt bag making line. A JIT line links blown film extrusion, flexographic printing and bag making into one in-line process: resin goes in at one end and printed, heat-cut T-shirt bags come out at the other, without film rolls being stored and re-handled between steps. The line is specified for biodegradable material as well as HDPE resin with filler.The in-line flexographic printer runs water-based and solvent-based inks, a bobbin change unit allows non-stop operation, and a waste recovery unit returns the die-cut scrap to the line. Compared with the two-colour full-automatic type in the same series, the JIT-55 is the semi-automatic configuration; bag size, motor size and roller width are listed in the specification table below.Type: T-shirt bag making line, in-line blown film, printing and bag makingConfiguration: mono-layer semi-automatic typeModel: JIT-55Material: biodegradable material, HDPE resin, fillerIn-line flexographic printer for water-based and solvent-based inksBobbin change unit for non-stop operationHeat-cutting type bag sealing unitWaste recovery unit for on-line reuse of die-cut scrap
T-Shirt Bag Making Machine for Biodegradable Material(GF-J/SV Series )
Categories : Bag Making Machine by Applications
The GF-J/SV Series is a T-shirt bag making machine configured for biodegradable material. It is the biodegradable-film version of JANDI'S GF-J/SV shopping bag machines: a servo-driven, heat-cutting bag maker that seals and cuts tubular film into T-shirt bags, set up for biodegradable film such as PLA and PBAT based compounds.As in the GF-J/SV range, the machine uses a tensionless sealing knife on a flat silicone sealing base, a heat-cutting blade, temperature controllers for the sealing and cutting stations, and a printing scanner for registering printed film. The SV models are fed from a pneumatic-lift jumbo roll unwind stand. Cutting width, cutting length, film thickness range and production speed are model-dependent and are confirmed at quotation.Type: T-shirt bag making machine for biodegradable material, GF-J/SV SeriesMaterial: biodegradable film such as PLA and PBAT based compoundsServo driveTensionless sealing knife on flat silicone sealing baseHeat-cutting type cutting bladePrinting scanner for printed filmPneumatic-lift jumbo roll unwind standCutting width, length, film thickness and speed confirmed at quotation
Off-Line Printing Machine (GF-E6-80)
Categories : Flexographic Printing Machines
The GF-E6-80 is a 6-COLOR off-line flexographic printing machine with an 800 mm printing width, the widest color count in JANDI'S GF-E series, which also includes 1, 2 and 4-color machines in widths from 600 mm to 1500 mm. Its printing possibilities cover 6+0, 5+1, 4+2 and 3+3, so a converter can print one side in six colors or split the colors across both faces of the film. Printing length is 10” – 35” on the S TYPE and 9” – 40” on the E TYPE.Printing speed depends on the inking system chosen: the stack type runs at Max. 80 M/min single face and Max. 60 M/Min double face, and the doctor blade type at Max. 120 M/Min single face and Max. 100 M/Min double face. The machine uses a standard 20” (508 mm) printing cylinder or a size specified by the buyer, a 250 PLI anilox roller in hard chrome plated or ceramic form, pneumatic cylinder up and down, push-button color registration, hot air box drying and one-station unwind and rewind. Options include an ink pump, additional printing cylinders, doctor blade, auto tension control, EPC, double unwind and double rewind, and a hydraulic system for cylinder up and down.Type: off-line flexographic printing machineColors: 6-COLOR; printing possibility 6+0, 5+1, 4+2, 3+3Printing width: 800 mmPrinting length: S TYPE 10” – 35”; E TYPE 9” – 40”Printing speed: stack type Max. 80 M/min single face, Max. 60 M/Min double face; doctor blade type Max. 120 M/Min single face, Max. 100 M/Min double facePrinting cylinder standard 20” (508 mm); anilox roller 250 PLI; pneumatic up/down; push-button registration; hot air box drying; 1-station unwind and rewindOptions: ink pump, additional printing cylinders, doctor blade, auto tension control, EPC, double unwind and double rewind, hydraulic cylinder up/down
Water Cooling Type Plastic Film Recycling Machine (GSR-100)
Categories : Recycling Lines by Application
The GSR-100 is the 100 mm size in JANDI'S GSR water cooling type plastic film recycling series for HD, LD and LLDPE and P.P. scrap. A spiral feeder delivers film into the 100 mm extruder, which is driven by a 60 HP motor; the melt passes a screen changer driven by an A.C. motor with reducer and leaves through a spaghetti type die head into a stainless steel water tank, where the strands are cooled before being blown dry and pelletized by a rotary cutter with fixed blade. Maximum capacity is 190KG/ HR.The GSR-100 sits between the GSR-85 and GSR-120 in a series of six sizes, from the GSR-45 with a 45 mm extruder and 15 HP motor to the GSR-150 with a 150 mm extruder and 100 HP motor. Control is from an independent switch board. The option list is shared across the series: conveyor with metal detector, crusher, screw conveyor, vacuum pump, pressure gauge, hydraulic screen changer, second extruder, vibrating screen, and air blower with storage tank.Type: water cooling (spaghetti type) plastic film recycling machineMaterial: HD/LD/LLDPE & P.P.Extruder: 100 mm; driving motor 60 HPMax. capacity: 190KG/ HRFeeding: spiral feeder; screen changer driven by A.C. motor with reducer; spaghetti type die headStainless steel water tank and blower; rotary cutter with fixed bladeSeries: GSR-45 (45 mm, 15 HP) to GSR-150 (150 mm, 100 HP); options: conveyor with metal detector, crusher, hydraulic screen changer, 2nd extruder, vibrating screen
3 Layer Co-Extrusion Inflation Machine (GF-L3C-MT)
Categories : Blown Film Extruders
The GF-L3C-MT is an A-B-C three-layer co-extrusion blown film line. Three extruders feed a co-extrusion die so that the inner, middle and outer layers of the film can be built from different resins, which is how a single film gains properties such as strength from one layer and sealability or surface finish from another. JANDI'S specifies the line for LDPE, LLDPE, mLLDPE, HDPE, EVA and PP.The MT configuration is built for wide flat film and gusseted film, with the film width and gusset width stated in the specification table below. Line configuration, film thickness range and downstream equipment are specified with the buyer at quotation, so the MT should be treated as a platform that JANDI'S tailors to the bag or packaging film the customer produces rather than a fixed catalog item.Type: A-B-C 3 layer co-extrusion blown film lineMaterials: LDPE / LLDPE / mLLDPE / HDPE / EVA / PPModel: GF-L3C-MTFilm width and gusset width: see specification tableDownstream configuration specified at quotation
PVA Water Soluble Blown Film Machine - GF-AV35.45
Categories : Blown Film Extruders
The GF-AV35.45 listing covers JANDI'S PVA water soluble blown film machines in two extruder sizes, which differ in extruder diameter and maximum film width. Both process PVA based water soluble, compostable and biodegradable compounds into tubular film for water soluble bags and packaging.Each machine is supplied with an extruder, a blown film die, an air ring, a take-up tower and a winder. Options are an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. The showroom specification table lists the film width and extruder size of each model; details are available with quotation and specifications can be changed on request.Type: PVA water soluble blown film machine, GF-AV35.45 listingModels: two extruder sizes, listed in the specification tableMaterial: PVA based water soluble, compostable and biodegradable compoundsExtruder, blown film die, air ring, take-up tower and winderOptions: auto loader, manual screen changer, pressure gauge, die rotating unitOptions: corona treater, flying knife, second station winder, air shaft, air chillerFilm width and extruder size per model in the specification table
PLA/ PBAT Blown Film Machine
Categories : Blown Film Extruders
The PLA/PBAT Blown Film Machine (GF-LB Series) is a blown film line configured for compostable and biodegradable resins based on PLA and PBAT. It produces tubular film from these compounds for downstream bag making, in the same way that JANDI'S GF-L series does for conventional polyethylene, and is listed in the showroom specification table as the GF-LB Series with film width and extruder size selected per model.The line is built from an extruder, a blown film die, an air ring, a take-up tower and a winder. Options include an auto loader, manual screen changer, pressure gauge, die rotating unit, corona treater, flying knife, second station winder, air shaft and air chiller. Film width, output and configuration are confirmed with the buyer at quotation; the specification table below lists the series range.Type: single-layer blown film machine, GF-LB SeriesMaterial: PLA/PBAT based compostable and biodegradable compoundsExtruder, blown film die, air ring, take-up tower and winderOptions: auto loader, manual screen changer, pressure gauge, die rotating unitOptions: corona treater, flying knife, second station winder, air shaft, air chillerFilm width and extruder size per model, confirmed at quotation
Tiny Inflation Machine (TINY-28)
Categories : Blown Film Extruders
The TINY-28 is a laboratory-scale blown film machine for HD, LD and LLDPE resin, intended for lab use and color testing and for producing small, thin film samples. It is the middle size of three, between the TINY-25 and the GF-HMM28. The extruder uses a 28 mm screw feeding a 40 mm blown film die, and temperature is controlled in 3 ZONES.Maximum film width is 200 mm at a maximum extrusion output of 8 KG/HR. The take-up unit has a 300 mm roller width and the single-station surface friction winder has an effective width of 200 mm. Because the machine is used for resin and masterbatch trials rather than production, JANDI'S notes that specifications can be changed to the customer's requirements.Application: lab use, color testing, small and thin filmMaterial: HD/LD/LLDPE resinMax. film width: 200 mmMax. extrusion output: 8 KG/HRExtruder: 28 mm screw; 40 mm blown film die; 3 ZONES temperature controlTake-up roller width 300 mm; winder effective width 200 mm
Biodegradable Blown Film Machine(GF-BC Series)
Categories : Blown Film Extruders
The GF-BC Series is a blown film machine for biodegradable material. It extrudes PLA and PBAT based compostable and biodegradable compounds into tubular film for bag making and packaging, and is listed in JANDI'S showroom alongside the PLA/PBAT Blown Film Machine (GF-LB Series). Offered as a series, it lets extruder size and film width be matched to the intended product.As a blown film line it is built around an extruder, a blown film die, an air ring, a take-up tower and a winder. The model range of the GF-BC Series, its film width and output, and the options that apply to it are confirmed with the buyer at quotation.Type: blown film machine for biodegradable material, GF-BC SeriesMaterial: PLA and PBAT based compostable and biodegradable compoundsExtruder, blown film die, air ring, take-up tower and winderRelated JANDI'S listing: PLA/PBAT Blown Film Machine (GF-LB Series)Model range, film width, output and options confirmed at quotation
3 Layers High Speed Inflation Machine (GF-ABA-55-50)
Categories : Blown Film Extruders
The GF-ABA-55-50 is a 3-layer high speed inflation machine with an A-B-A structure: the two outer layers are fed from one extruder and the core layer from a second, so that a 3-layer film is produced with two extruders rather than the three used in JANDI'S A-B-C lines (GF-E3C and GF-L3C series). The listing sits in the showroom alongside the biodegradable PLA/PBAT blown film machines.The A-B-A arrangement is used where the two skin layers share the same recipe and the core carries a different compound. The die, air ring, take-up tower and winder are configured with the buyer at quotation, together with film width, thickness range and output; suitability for biodegradable compounds is confirmed at the same stage.Type: 3-layer high speed inflation machine, A-B-A structureModel: GF-ABA-55-50Two extruders: one feeding both outer layers, one feeding the coreBlown film die, air ring, take-up tower and winderFilm width, thickness range and output confirmed at quotationSuitability for PLA/PBAT compounds confirmed at quotation