English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Servo Motor Driven Zipper Bag Making Machine
Categories : Plastic Bag Making Machines
1. Servo Motor Driven, Efficient mechanical structure 2. User-friendly Control Panel, easy to understand easy to operate. 3. Digital control for production length adjusting, precise and less wastage. 4. Simple design, assemble precisely, durable, and easy for maintaining. 5. Easy operating, Pleasant cutting and sealing, with high firmness and no scratch. 6. Real time printing tracing control for accurate registration, when printing error occurred machine will stop automatically.
Central Safety Filters
Categories : Separating & Filtration Equipment
SCSF series central safety filter in central loading system adopts large dust collector to filter dust and small impurities in material so can effectively protect blower and prolong its service life. Self-cleaning function realize the effective cleaning of the filter by set-up auto timer, which can reduce manual clean times. Equipped with vacuum breaking valve to not only protect the blower, but also accelerate conveying and loading speed.
Tire Recycling System
Categories : Crushing, Shredding & Granulating Equipment
The tire pre-shredding machine can be equipped with bolted cutting tools to minimize the operational cost and simplify maintenance of the line. Two-stage rasper system effectively liberates the steel from the rubber enabling effective separations and the production of clean wire. The fine granulation system is equipped with a special rotor designed specifically for tire rubber size reduction. It provides maximum throughput, whilst minimizing the amount of fines created. The machine is also optimized for low operational and wear costs. Textile and dust is aspirated at several positions of the recycling system. A central Reverse Jet Filtration System extracts dust from the entire system. Our Milling System can be installed at the back end of the tire recycling machine line system. The size and configuration of the Milling System is configured according to the specific production requirements i.e. size and throughput. Advanced sound attenuation enclosures can be provided to reduce the noise level of the system to < 85dBA. Water spray & misting systems are installed on key components to maintain processing temperatures at safe levels and to protect against fire. System automation ensures that components actions are linked, the system capacity is maximized, and the system is protected against interfering material in the best way. (More About "10 Insights into Our Tire Shredding Machines : Shred Smart" ...)
THREE LAYER BLOWN FILM EXTRUDER PLASTIC INFLATION MACHINE : KMTL-E3
Categories : Blown Film Extruders Lines
The KMTL-E3 is a three-layer HDPE/LDPE/LLDPE/mLDPE blown film extrusion line offered in three sizes, with film widths from 900 to 1,800 mm and thickness from 0.02 to 0.20 mm, suited to car film, food packaging, and courier bags.The line comprises the KMTL-40-45-40 E3, KMTL-45-55-45 E3, and KMTL-55-65-55 E3 configurations, with screw diameters of Ø 40-45-40 mm, Ø 45-55-45 mm, and Ø 55-65-55 mm (28:1 L/D ratio), driven by 15-20-15 HP, 20-30-20 HP, and 30-50-30 HP AC motors with inverter. Film output ranges from 110 to 250 kgs/hr across the three sizes.Model line: KMTL-40-45-40 E3 / KMTL-45-55-45 E3 / KMTL-55-65-55 E3Suitable material: HDPE/LDPE/LLDPE/mLDPEFilm thickness: 0.02-0.15 mm / 0.025-0.20 mm / 0.03-0.20 mmFilm width range: 900 mm / 1400 mm / 1800 mmFilm output: 110 kgs/hr / 150 kgs/hr / 250 kgs/hrScrew diameter/type: Ø 40-45-40 mm / Ø 45-55-45 mm / Ø 55-65-55 mm, L/D ratio 28:1Driving motor: AC 15-20-15 HP / 20-30-20 HP / 30-50-30 HP + InverterDie diameter: Ø200 mm / Ø300 mm / Ø500 mmTake-up speed: 65 m/min / 45 m/min / 40 m/min
JIT Shopping Bag Making Line (JIT Series)
Categories : Bag Making Machine by Applications
The JIT Series is JANDI'S in-line shopping bag making line. Blown film extrusion, printing and bag making run as one continuous process, so resin enters at one end and finished, printed shopping bags leave at the other; there are no intermediate film rolls to store, transport or re-load. This listing covers the series as a whole, which is offered in mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and a two-colour full-automatic type. Because the steps are linked, JANDI'S describes the line by what it removes from a conventional three-machine set-up: separate handling between extrusion, printing and bag making, the floor space and storage for film rolls, and the die-cut scrap, which is recovered on-line and fed back. Line composition, printing configuration, bag size and output are configured with the buyer at quotation. Type: in-line shopping bag making line, JIT Series Process: blown film extrusion, printing and bag making in one line Configurations: mono-layer semi-auto, mono-layer full-auto, ABA full-auto, two-colour full-auto Single-side printing configuration, colour count confirmed at quotation Die-cut scrap recovered on-line No intermediate film roll storage between steps Line composition, bag size and output configured at quotation
T-Shirt Bag Making Line (JIT-45D)
Categories : Bag Making Machine by Applications
The JIT-45D is the 2-Color T-shirt Bag Making Line in JANDI'S JIT series. Rather than a stand-alone bag machine, a JIT line links blown film extrusion, printing and bag making into one in-line process, so that resin enters at one end and finished, printed T-shirt bags leave at the other without intermediate film rolls being stored and re-handled. The 45D designation identifies the two-color printing configuration of the line. The JIT series is offered in several configurations — mono-layer semi-automatic and full-automatic types, an ABA full-automatic type and the 2-color full-automatic type represented by the JIT-45D — so the line can be matched to the film structure and print requirement of the bag. Line composition, film width and output are configured with the buyer at quotation, and the specification table below lists the models in the series. Type: T-shirt bag making line, in-line blown film, printing and bag making Configuration: 2-Color full-automatic type Model: JIT-45D Series alternatives: mono-layer semi-auto, mono-layer full-auto, ABA full-auto types Line composition and output configured at quotation
T-Shirt Bag Making Line (JIT-55)
Categories : Bag Making Machine by Applications
The JIT-55 is the mono-layer semi-automatic type in JANDI'S JIT T-shirt bag making line. A JIT line links blown film extrusion, flexographic printing and bag making into one in-line process: resin goes in at one end and printed, heat-cut T-shirt bags come out at the other, without film rolls being stored and re-handled between steps. The line is specified for biodegradable material as well as HDPE resin with filler. The in-line flexographic printer runs water-based and solvent-based inks, a bobbin change unit allows non-stop operation, and a waste recovery unit returns the die-cut scrap to the line. Compared with the two-colour full-automatic type in the same series, the JIT-55 is the semi-automatic configuration; bag size, motor size and roller width are listed in the specification table below. Type: T-shirt bag making line, in-line blown film, printing and bag making Configuration: mono-layer semi-automatic type Model: JIT-55 Material: biodegradable material, HDPE resin, filler In-line flexographic printer for water-based and solvent-based inks Bobbin change unit for non-stop operation Heat-cutting type bag sealing unit Waste recovery unit for on-line reuse of die-cut scrap
GRP-H Single-phase solid state relay with Advanced Diagnostic, up to 120A
Categories : Control Equipment / Systems
The ability to propose customized control solutions allows to rapidly satisfy the most different automation needs. For this purpose, the GRP series provides a wide range of extremely compact SSRs, with a solid basic structure but scalable as current sizes (from 15A to 120A), control type and configuration features. Current range from 15A up to 120A Ultra slim dimension IO-Link communication Digital and proportional (V/mA) command Control mode (ZC/BF/HSC/PA) Linear resistance and Infrared lamps (LWIR/MWIR) heaters control Load voltage 480Vac, 600Vac Opt. Partial heater break alarm (1/8) NFC configuration Din rail mounting
Slitting Machines ULTRA/ UHS
Categories : Slitters and Rewinders
The SLIT-UHS series slitter is ideal for the serious slitting all types of flexible packaging materials as well as label stock & paper. The slitter comes standard with razor cutters and groove roller configuration. A shear cutter system is offered as option for paper and other pressure sensitive materials. The machine uses three AC Vector Drives and has automatic tension on unwind and rewind controlled through easy-to-use PLC & MMI touch screen. The machine features a vacuum roller that keeps the material stable during operation at high speeds 600m/min. Friction rings are used on rewind shafts to ensure the production of quality slit rolls when the film thickness varies.
Single Screw Pelletizing Extruder | CK-HS
Categories : Recycled Plastic Pelletizing Lines
CK-HS series Single Screw Extruder can be applied to wide applications, e.g., masterbatch, compounding, and recycling. The screw rotational speed is second only to our CK-DHS high-throughput series. Possible materials : PP, HDPE, LDPE, PS, ABS, ABS & PC, PC, PA, PET, PBT, etc. Extruder screw : The extruder screw of CYKF’s single screw extruder is customized to satisfy different material formulations. The optimal configuration of screw zones ensures high-efficiency extrusion performance. The strict quality management guarantees good quality and long service life of this critical component. Die : The die material and mold runner must be selected and designed according to the physical properties and characteristics of plastics to avoid occurrences of uneven material flow rate, retention, excessive molding pressure, in-mold temperature increase, decomposition and carbonization or other situations that may damage material properties of plastics.
GRM-H Compact single phase Power Controller up to 120A
Categories : Control Equipment / Systems
The features of GRM-H Series Power Controllers ensure efficient heating management even in the case of complex electrical loads, which require special features, as in the case of infrared lamps or Silicon Carbide heating elements. Compact size from 15A to 120A Load voltage 480V, 600Vac Digital IO-Link communication Configurable control mode Zero Crossing, Burst Firing, Half Single Cycle or Phase Angle Feedback V,I,V2, I2, P, Z Soft start and current limits Logic command Vdc, Analog, PWM or IO-Link Advanced partial load break diagnostics (1/8) Slave control output (Two-phase/Three-phase) Configuration and Diagnostics via smartphone App with NFC technology Calibration and alarm reset commands via Digital Input Overview The ability to propose customized control solutions allows to rapidly satisfy the most different automation needs. For this purpose, the GRP series provides a wide range of extremely compact SSRs, with a solid basic structure but scalable as current sizes (from 15A to 120A), control type and configuration features. Control An accurate process control is the condition to achieve a constant and a high-quality production. To reach this goal it is necessary to manage in the best way the different types of industrial heaters from linear resistances to infrared lamps. For this purpose, the new series of SSR provides a series of control functionalities (ZC/ /BF/HSC/PA/Softstart) fully configurable to adapt to the various needs. Diagnostics Preventing possible anomalies allows to limit or eliminate harmful downtime and production. The GRP series includes dedicated functions such as the HB alarm for partial load breakage with accuracy of 1/8 of the total load, SCR short circuit, overtemperature and power failure. IO-Link communication Factory digitization is reaching its final frontier, the field level of the automation pyramid. In this level IO-Link is confirming itself as the most suitable communication to easily reach devices such as sensors and actuators. From this perspective, the GRP series has been developed to be integrated within this automation architecture. NFC configuration Simple and safe commissioning, maintenance and quick diagnostics are now within the capabilities of devices like SSR. All this thanks to the NFC technology, which allows to extend the user interface using normal Smartphone or Tablet as intelligent configurators. Thanks to an intuitive graphical user interface, setup or diagnostics are particularly easy.
Seaming Machine K3 Plus
Categories : Shrink Sleeve Machinery
K3 Plus is an automatic seaming machine with wide width. Plus series is our new generation seamer. The new design makes the most operator friendly machine available, facilitating training with the most automated machine on the market. Via automatic frictionless lay flat system, no need to adjust the forming section over times. Besides, new generation seamer has 3 independent tension zones that allow forming section for better lay flat control. We believe that the Plus series revolutionize the way shrink sleeves are converted.