Hot Plate Plastic Welding Machine KH-33 (upper and lower cylinder type)
Categories : Welding & Surface Treatment Equipment
1.The machine is constructed of main body, hot mold set and upper & lower fixtures. Upper and lower fixtures moved by cylinder. 2.The welding part's surfaces melted in proper welding time when pressed against the hot plate. 3.The hotplate retracts and forced welding parts together in proper holding time. 4.Enable to weld two mold cavities in one stroke.
Hot Needle Perforation Machine
Categories : Plastic Bag Making Machines
The MGR-HPR-1000 is Ming Jilee's hot needle perforation machine, designed to perforate BOPP, CPP, and PE film. The hot needle pins are imported from Europe, and the perforating system runs as a closed system that keeps hot air energy within the working area, keeping heating consumption down.A high-precision edge position controller and fully automatic tension controller keep film quality stable during operation, and pin design is customized down to a minimum pitch of 2 × 2 mm. For thin PE material, the heating system can be switched off so the needles mark small holes instead of perforating with heat. A special holding shaft lets operators remove finished rolls easily once a roll is complete.Model: MGR-HPR-1000Unwind width: 300 - 1000 mmRewind diameter: 600 mm (Max.)Pin design: customized (min pitch is 2 × 2 mm)Machine speed: 60 - 130 m/min (depend on material and design)Machine dimension: 4,200 (L) × 2,150 (W) × 1,960 (H) mmMachine weight: 4000 kgRequired power: 24.5 kw
Hot Air Tube Sealing Machine
Categories : Tube Filling & Sealing Machines
-Monitor screen for easy operation. -Imported hot air equipment can make sealing fast and blazonry. -With automatic tube orientation.Cutting tail automatically after sealing. -Tube tail is durable after being sealed.
Horizontal Mixer
Categories : Mixers and Blenders
To store and mix the material. Set it in front of the pelletizier. Make material supply stability. Can customize for customer, adding the cooling function or heat function. Customized size is acceptable.
Horizontal Mixer / Blender (YBHM)
Categories : Mixers and Blenders
Mixing quickly and evenly with motor overload protector and power safety device. It is safe and easy to operate. The mixing capacity could be extended to one ton. The mixing barrel can be tilted freely at the angle degrees for discharge and maintenance.
Horizontal Blender
Categories : Mixers and Blenders
Horizontal Blender is used for mixing two or more additives, especially for the mixing of pellets and powders that are viscous or easily occurring materials bridging. The blender equips with counter-rotating blades, which allows the materials to be mixed quickly, evenly, and efficiently. Even the materials have different specific gravity and size, the blender still can reach good result by its high-performance blade design.
Self Contained Hopper Loaders SAL-U
Categories : Material Handling, Conveying & Storage
SAL-U series self-contained hopper loaders are Euro design with stainless steel hopper to avoid material contamination. In addition, it has an attractive appearance, a sound-proof motor cover to reduce noise level and a top handle to enable convenient movement. Also the remote operation has been realized by using a detachable control panel.
Multi-station-Hopper-Loaders-SAL-UG122/124
Categories : Material Handling, Conveying & Storage
"One-to-Two or One-to-Four" hopper loader can greatly lower the cost. The dust collective chamber features a cyclone separator and a dust collective bin to effectively reduce the load of the filter. Separate hopper receivers are designed in European style. Separate dust collector is convenient for dust cleaning. Main unit equips with faults and motor overload indicators to show faults fast. All main units has vacuum breaking valve to protect the blower. Standardly equipped with warning lamp as the alarm device. CE safety plug ensures safe and reliable operation. SCH-6U/12U/24U storage hoppers with Standard and Insulated type are available as options, which can be installed on reed switch storage hopper and also on IMM directly. In the case of much impurity or recycled materials included in raw materials, main unit can be equipped with air accumulator auto washing unit as options, and add "A" at the model behind. (Suitable for SAL-3.5HP-UG and models above, except for SAL-UGP series.). Optionally provide multi-functional installation frame HMB-900 with 900 mm largest dia. adjusting range for selection. Buzzer available as an option.
“Standard” Self-contained Hopper Loaders - SAL
Categories : Material Handling, Conveying & Storage
SAL series of models are mainly used beside injection molding machines, extrusion machines or other machines to dry the plastic materials, which are installed on the drying hopper directly. It also can collocate with the SICH or SCH collective hoppers to work on the inlet of the injection molding machine. After setting, the machine can work automatically and independently without frequent adjustment. For its high installing position, it may give shortage alarm occasionally. Therefore, it’s available to equip the distal switch options to dismiss the alarm.
Honeycomb_Dehumidifiers-SD-H
Categories : Dryers and Dehumidifiers
SD-H series honeycomb dehumidifiers are mainly used to dry hygroscopic engineering plastics. A honeycomb-rotor is used to offer effective drying, which under ideal conditions, can supply dehumidified dry air with a dew-point lower than -40℃.This series comprises 15 models of honeycomb dehumidifiers, the largest of which can provide dry air up to a quantity of 4,000 m3/hr.