English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Twin-Cone High Speed Pelletizing Machine-Underwater Cutting
Categories : Pelletizing & Compounding Lines
Suitable for high viscosity raw materials, such as PP, PMMA, TPU, PU, PLA, PET, TPU, PU, PLA and etc. High viscosity raw material. High Capacity, Low electricity usage, Easy to clean and change materials, Knead well, Underwater cutting
Paper Cutting Machine
Categories : Cutting Machines
● Cutting Tolerance: +-0.5 MM ● Machine Speed: 200 M/MIN
Hot-Cut type T-shirt Bag Making Machine TP-V
Categories : Bag Making Machine by Applications
High speed hot-cut system - For printed T-shirt bags. Photocell & servo registers accurate print position. High speed hot-cut system available in 200/250/300rpm systems. Manual Collection - Economy system without gripper & Pneumatic punch. Labour collect blocked piles and punch manually by off-line pneumatic punch.
E waste recycling system
Categories : Washing & Classifying Lines
The plastic wash line system is designed for mixed rigid plastics washing and separation. Minimizing the recycling water flow rate and evaporation losses. The shredding system is with wear resistant design to maximize the consistent running of the system and minimize operational costs. High speed washing system with corresponding speed according to the material type liberates contamination from the plastic. The underwater force-washing paddle of the washing tank maximize the washing efficiency. Mechanical and thermal drying system minimize the moisture content of the end product. Shredding, high speed washing and drying is optimized to avoid over processing, which causes material loss (fines creation). Mechanical (centrifugal and squeezing) and thermal drying systems control the moisture content of the finished product. System automation makes sure the components actions are linked, the system capacity is maximized, and that the system is suitably protected against interfering material. Customized 316 stainless steel system is optional for corrosive material washing. NIR, Color, X-ray or Electrostatic sorters can be provided according to the material type and separation requirements.
High Speed 1+1 Ear-loop Face-Out Type Medical Mask Machine
Categories : Bag Making Machine by Applications
The MGA-MSK-400-S8 is a high-speed 1+1 ear-loop face-out type medical mask machine that converts non-woven and melt-blown fabric rolls into finished masks through nose wire insertion, ultrasonic welding, ear loop attachment, and cutting in one continuous operation. It draws material from four unwinding stations feeding non-woven and melt-blown materials, with a nose bridge flattening device supporting mask quality.The ultrasonic welding device is Taiwan-made, and servo-controlled ear-loop cutting keeps pace with production speed. Eight servo motor sets drive the machine, and an automatic conveyor moves counted, stacked masks smoothly to packaging.Model: MGA-MSK-400-S8Mask size: 175 x 95 mm or 145 x 95 mm (machine produces one size only)Output: 65 - 95 pcs/minMachine dimension: 4,500 (L) x 2,430 (W) x 1,988 (H) mmNet weight: 800 kgPower consumption: 9 kwPower input: 220V, single phaseServo motors: 8 sets
High Speed KF94 Fish Type Mask Making Machine
Categories : Bag Making Machine by Applications
The MGA-MSK-KF94 is a high-speed KF94 fish type mask making machine that converts non-woven fabric rolls into finished KF94-shaped masks through nose wire insertion, ultrasonic welding, ear loop attachment, and cutting in one continuous operation. It is equipped with two sets of 15kHz 2600W ultrasonic systems and two sets of 20kHz ultrasonics for efficient mask welding, plus a rotating cutting roll designed specifically for the fish mask shape.The ear loop welding station uses 11 servo motors for precise control, and a high-level PLC with virtual angle control synchronizes each motor's working angle for accurate ear loop welding placement.Model: MGA-MSK-KF94Mask design: KF94 Fish Type MaskOutput: 60 - 95 pcs/minMachine dimension: 6,735 (L) x 3,231 (W) x 2,000 (H) mmMachine weight: 2,500 kgRequired power: 6 kwUltrasonic welding: 2 x 15kHz 2600W + 2 x 20kHz systemsEar loop welding: 11 servo motors, PLC virtual angle control
High Speed Loop Handle Bag Maker With Continuous Sealers LY-800HLC
Categories : Plastic Bag Making Machines
LY-800HLC is a ultra high-speed, specialized soft-loop bag making machine. It equipped with 5 sets of servo motors to show its outstanding performance. The unique continuous sealer provides highly efficient and good quality of top sealing. The human-machine interface is standard part for easy and friendly operation.
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-65
Categories : Blown Film Extruders
The KML-65 is an LDPE/LLDPE blown film extrusion line for wide-format film production. Within the plastic inflation machinery process, LDPE/LLDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KML-65 processes film in 0.025-0.15 mm thickness and 400-1400 mm width, with output between 50-105 kgs/hr.The extruder runs a Ø 65mm screw at a 26:1 L/D ratio with 4-zone auto thermo control on the barrel, driven by an AC 50 HP motor with inverter. The die unit uses a Ø350 mm die with a Ø400 mm air ring, and the take-up section reaches speeds up to 45 m/min.Model: KML-65Suitable material: LDPE/LLDPEFilm thickness: 0.025-0.15 mmFilm width range: 400-1400 mmFilm output: 50-105 kgs/hrScrew diameter: Ø 65mm, L/D ratio 26:1Driving motor: AC 50 HP + InverterMachine dimension: 800×400×630 cm
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-80
Categories : Blown Film Extruders
The KML-80 is a high-speed plastic inflation machine for blown film extrusion of LDPE and LLDPE resins, producing film up to 2,000 mm wide for applications such as plastic farm film and car film.The extruder unit is fitted with an Ø80mm screw at a 30:1 L/D ratio and a 75 HP AC driving motor with inverter, supported by 7-zone auto thermo control. The die unit uses an Ø500mm die and Ø550mm air ring, and the take-up unit runs at speeds up to 45 m/min across the 2000 mm effective width.Model: KML-80Suitable material: LDPE/LLDPEFilm thickness: 0.03-0.15 mmFilm width range: 2000 mmFilm output: 200 kgs/hrScrew diameter/type: Ø80mm, L/D ratio 30:1Driving motor: AC 75 HP + InverterTake-up speed: 45 m/minMachine dimension: 800×500×900 cm
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-45/55
Categories : Blown Film Extruders
The KML-45/55 is an LDPE/LLDPE blown film extrusion line offered in two model variants for plastic shopping bag production. Within the plastic inflation machinery process, LDPE/LLDPE resin is extruded and inflated into tubular film before take-up and winding. The KML-45 produces film up to 650 mm width and the KML-55 between 400-1000 mm width, both in 0.02-0.15 mm thickness.The KML-45 runs a Ø 45mm screw and the KML-55 a Ø 55mm screw, both at a 26:1 L/D ratio with 3-zone auto thermo control on the barrel. Driving motors are AC 20 HP for the KML-45 and AC 30 HP for the KML-55, both with inverter, and each die unit pairs with its own air ring for bubble cooling.Models: KML-45 / KML-55Suitable material: LDPE/LLDPEFilm thickness: 0.02-0.15 mm (both models)Film width range: 650 mm (KML-45) / 400-1000 mm (KML-55)Film output: 20-55 kgs/hr (KML-45) / 30-72 kgs/hr (KML-55)Screw diameter: Ø 45mm (KML-45) / Ø 55mm (KML-55), L/D ratio 26:1Driving motor: AC 20 HP + Inverter (KML-45) / AC 30 HP + Inverter (KML-55)Machine dimension: 470×165×400 cm (KML-45) / 500×220×450 cm (KML-55)
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-120
Categories : Blown Film Extruders
The KML-120 is a high-speed plastic inflation machine for blown film extrusion of LDPE and LLDPE resins, producing film in a width range of 1800-3000 mm for applications such as plastic farm film.The extruder unit is fitted with an Ø120mm screw at a 30:1 L/D ratio and a 150 HP AC driving motor with inverter, supported by 8-zone auto thermo control. The die unit uses an Ø750mm die and Ø800mm air ring, and the take-up unit runs at speeds up to 22 m/min across the 3000 mm effective width.Model: KML-120Suitable material: LDPE/LLDPEFilm thickness: 0.05-0.15 mmFilm width range: 1800-3000 mmFilm output: 280 kgs/hrScrew diameter/type: Ø120mm, L/D ratio 30:1Driving motor: AC 150 HP + InverterTake-up speed: 22 m/minMachine dimension: 16.5×7×10 m
LDPE/LLDPE HIGH SPEED PLASTIC INFLATION MACHINE : KML-35
Categories : Blown Film Extruders
The KML-35 is an LDPE/LLDPE blown film extrusion line within PRM-Taiwan's plastic inflation machinery category, where LDPE/LLDPE resin is extruded and inflated into tubular film through a die and air ring before take-up and winding. The KML-35 processes film in 0.015-0.15 mm thickness at up to 500 mm width, with output between 10-30 kgs/hr.The extruder runs a Ø 35mm screw at a 26:1 L/D ratio with 3-zone auto thermo control on the barrel, driven by an AC 10 HP motor with inverter. The die unit uses a Ø100 mm die with a Ø150 mm air ring, and the take-up section reaches speeds up to 75 m/min.Model: KML-35Suitable material: LDPE/LLDPEFilm thickness: 0.015-0.15 mmFilm width range: 500 mmFilm output: 10-30 kgs/hrScrew diameter: Ø 35mm, L/D ratio 26:1Driving motor: AC 10 HP + InverterMachine dimension: 400×120×380 cm