Search - temperature controller

Bottom Sealing Bag Making Machine (Heat Cutting)(GF-J/SV )

Categories : Plastic Bag Making Machines

The GF-J/SV series is a heat-cutting bag making machine for bottom sealing bags, the type used for shopping bags and T-shirt bags where the bottom seal and the cut are made in one heated operation. The series covers the GF-J20E/SV, GF-J32E/SV and GF-JD32E/SV. The GF-J20E/SV makes a single lane up to 430 mm wide, while the GF-J32E/SV and GF-JD32E/SV run two lanes of 330 mm each; maximum cutting length is 750 mm on all three, on film from 0.008 - 0.08 mm, with length accuracy of + / - 1 mm.Production in non-stop operation is 220 CYCLES per minute on the GF-J20E/SV and 200 CYCLES on the two-lane models. Sealing uses a tensionless sealing type knife and a heat-cutting blade on a flat silicon base, with two or three temperature controllers depending on the model. SV models add a pneumatic lifting jumbo roll unwind stand, a servo drive system for bag length adjustment, digital control, rubber-roller out-feed with air blowing, and an automatic conveyor stacking unit. Punching presses, including in-line type, are optional.Type: heat-cutting bag making machine, bottom sealing bagModels: GF-J20E/SV, GF-J32E/SV, GF-JD32E/SVMax. cutting width: 430 mm (1 lane) or 330 mm x 2 linesMax. cutting length: 750 mm; film thickness 0.008 - 0.08 mm; length accuracy + / - 1 mmProduction: 220 CYCLES/min (GF-J20E/SV), 200 CYCLES/min (two-lane models), non-stop operationSealing knife: tensionless type; cutting blade: heat-cutting type; flat silicon baseSV models: pneumatic lifting jumbo roll stand, servo drive bag length adjustment, digital control, automatic conveyor stackingOptions: manual punching press, punching press, in-line punching press

HDPE/LDPE Stripe Two Color Co-extrusion Film Blowing Machine

Categories : Co-Extrusion Blown Film Machines

Features Application:  2 colors stripe T-shirt bag Suitable material: HDPE, LDPE Screw L/D ratio: 30:1 Motor direct connection type gearbox PID+SCR temperature controller ABB or HITACHI inverter Gusset device

PP Tubular Film Blowing Machine

Categories : Blown Film Extruders

Features Application:  PP bags Suitable material: PP blown grade resin Film layer: 1 layer Screw L/D ratio: 28:1 Motor direct connection type gearbox PID+SCR temperature controller ABB or HITACHI inverter Share this:

LDPE High Speed Mono Layer Film Blowing Machine

Categories : Blown Film Extruders

Features Application: T-shirt bag, packaging bag, construction film, agriculture film, lamination film etc Suitable material: LDPE / LDPE+LLDPE Film layer: 1 layer Screw L/D ratio: 30:1 Motor direct connection type gearbox PID+SCR temperature controller ABB or HITACHI inverter

CM Serial HDPE High Speed Mono Layer Film Blowing Machine

Categories : Blown Film Extruders

Application: T-shirt bags, shopping bags, garbage bags, mattress cover, laundry bags etc Suitable material: HDPE / MDPE / HDPE+LLDPE Film layer: 1 layer Screw L/D ratio: 30:1 Motor direct connection type gearbox PID+SCR temperature controller ABB or HITACHI inverter Gusset device Features Direct connection design gearbox : Compact & Space-Saving Design, High Rigidity & Minimal Backlash, Superior Concentricity & Reduced Vibration Servo motor : High Efficiency & Low Heat Generation, High Speed with Constant Torque, Smooth Low-Speed Operation Barrel & Screw : L/D ratio 30:1, PTA bi-metal process Die head by material resin types to maintain effective shear rates during extrusion. Air rings for precise thickness, fast cooling, and stable bubble Thermo control : PID & SCR both for Extruder & Extruder die Optional PLC & HMI End-to-End In-house Production We offer customized solutions to meet your needs.

LDPE Double Layer Film Blowing Machine

Categories : Blown Film Extruders

Features Application: Agriculture film, construction film, water pouch, garbage bag etc Suitable material: LDPE / LLDPE (HDPE by request) Film layer: 2 layer Screw L/D ratio: 30:1 Motor direct connection type gearbox PID+SCR temperature controller ABB or HITACHI inverter

HDPE/LDPE Twin Head High Speed Film Blowing Machine

Categories : Blown Film Extruders

Features Application:  T-shirt bags, flat bags etc Suitable material: TH-H: HDPE / MDPE / HDPE+LLDPE // TH-L: LDPE / LDPE+LLDPE Film layer: 1 layer Screw L/D ratio: 30:1 Motor direct connection type gearbox PID+SCR temperature controller ABB or HITACHI inverter

Single-Web Stand-Up Pouch, Zipper Bag, Automatic Fold and 3-Side-Seal Bag Making Machine-AFM-SPZ Series

Categories : Plastic Bag Making Machines

Materials Thickness in 40-150 $\mu$, heat-sealable laminated materials or other multi-layer materials. (When producing stand-up pouches / doypacks, the material thickness should be 80-150 $\mu$). Main Power The main power AC servo motor with driver provides precise heat-sealing time control, suitable for isochronous heat-sealing control systems. Feeding Motor Equipped with two sets of feeding servo motors, which can greatly increase machine speed and make bag-making length more precise. Unwinding Section Horizontal unwinding mechanism equipped with cantilever/movable mechanical shaft with 3” adapters, making loading and unloading easier and more convenient. Equipped with roll diameter calculation-based automatic tension controller, providing continuous and stable unwinding tension control. Equipped with full-automatic edge/line position controller (LPC) to make heat-sealing and trimming match the material printing position. Newly improved dancer roller provides more stable tension before materials enter the heat-sealing station. Gusset tucking device allows adjustment of gusset depth and features pre-forming function to prevent material wandering and make the heat-sealing position more precise. Bag-Making Section AFM-73SZ can manufacture four different types of bags: 3-side seal bags, bottom-gussetless stand-up pouches, 3-side seal zipper bags, and bottom-gussetless stand-up zipper pouches. When manufacturing 3-side seal bags, 3-lane production can be performed within the maximum raw material width range. When manufacturing zipper bags, bottom-gussetless stand-up pouches, and folded bags, 1-lane production can be performed within the maximum raw material width range. Equipped with ultrasonic sealer to flatten the zipper edge-sealing portion, making the seal more aesthetic and smooth, and preventing leakage issues. Equipped with double-length bag control system to extend the maximum bag length range when producing 3-side seal bags (maximum multiplier: 9 times). Equipped with automatic heat-sealing station lifting device upon machine stop to prevent overheating during shutdowns. Equipped with adjustable K-type heat-sealing mold, suitable for larger-sized stand-up pouches. Safety cutter design provides operators with enhanced safety protection. Machine Maintenance Uses capped bearings which require no lubrication, extending component service life while simplifying maintenance work. Computer control system, touch screen control, and triple servo control system. Can control isochronous heat-sealing time, significantly reducing material waste during trial runs. Heat-sealing temperature settings do not need to be changed when adjusting machine speed. Equipped with a touch screen for easier and smoother operation. Built-in heat-sealing temperature controller allows direct setting on the touch screen for convenient and precise control. Can choose between automatic alarm / automatic stop operation modes when machine errors occur. Alarm messages are automatically displayed on the screen. Built-in database can store 100 sets of job parameters. Operation and maintenance procedures are also stored in the computer control system and can be consulted at any time.

5 Layer Co-Extrusion Film Blowing Machine

Categories : Blown Film Extruders

Features Suitable material: HDPE / MDPE / LD/LLDPE / PP / PA / Metallocene / EVA Film layer: 5 layer Screw L/D ratio: 30:1 Motor direct connection type gearbox PID+SCR temperature controller ABB or HITACHI inverter Oscillating rotary device (haul-off unit) I.B.C. Inter-bubble cooling system Air cooler for air ring & I.B.C. E.P.C. Edge position film guiding system Back to back automatic winders + Trim waste rewinder Air shaft x 4 pcs

Temperature Controller-AO / AW Series

Categories : Control Equipment / Systems

Thermolator FMC Series Temperature Controller

Categories : Cooling & Heating Equipment

High temperature water returns to the machine and then be pressure by pump to the heater. After being heated, water will be forced to mold and continue the circle. In the process, if the water temperature is too high, the system will activate the solenoid valve to let cooling water cool down the temperature directly until the temperature is down to the system requirement. If the temperature keeps increasing and reaches to the set point of ultra high temperature, system will sound high pressure alarm and stop operation. When cooling water pressure fails to reach the set value, pressure switch will send a signal of water storage to launch low pressure alarm and machine stops. - Thermolator FMC-W Water Type Temperature Controller - Thermolator FMC-H Oil Type Temperature Controller - Thermolator FMC-WP&WPA Water Type High Temperature Controller  

High Temperature & High Pressure Heat Transfer Medium System - GF/TO Series

Categories : Control Equipment / Systems

GF/TO-Series Heat Transfer Medium for indirect Circulation System / Mold Temperature Controller With both cooling and heating capabilities, is the required system for enhancing the effectiveness of the main unit's running temperature. ●With both heating and cooling functions. ●A substitute for steam boiler: Safe, inexplosive and high heat efficiency.