Slitting & Rewinding Machine
Categories : Plastic Bag Making Machines
The BJL-B600 is Ming Jilee's slitting and rewinding machine for bag converting operations. It processes CPP, paper, and BOPP substrates, slitting to widths from 12 - 600 mm for downstream converting.Slitting and rewinding output ranges from 0 - 120 M/min, giving operators flexibility to set speed according to substrate type and roll size. The machine has a footprint of 1,100 (L) x 2,300 (W) x 1,300 (H) mm.Model: BJL-B600Feed material: CPP, Paper, BOPPSize: 12 - 600 mmOutput: 0 - 120 M/minMachine dimension: 1,100 (L) x 2,300 (W) x 1,300 (H) mm
Slant Mixer / Blender (YBVRM)
Categories : Mixers and Blenders
Mixing quickly and evenly with motor overload protector and power safety device. The mixing barrel can be tilted freely at the angle degrees for discharge and maintenance.
HBE series Blow Moulding Machine Single Head, Single Station
Categories : Blow Molding Machines by Stations
HBE series Blow Moulding Machine Single Head, Single Station
Single Side Extrusion Lamination Machine (YSL)
Categories : Extrusion Coating & Lamination Machines
This series of machines are available for jumbo bag, geotextile, spunbond and paper …etc. To do single side lamination process.
Single Shaft Shredder
Categories : Crushing, Shredding & Granulating Equipment
Single-shaft shredder system can be almost universally used to and are able to process a board range of different materials (woods, copper wire, plastic lump, tire paper, etc.)
Single Shaft Shredder-V Series
Categories : Crushing, Shredding & Granulating Equipment
V Series Single Shaft Shredders are small - medium size reduction machines suitable for processing a wide range of materials to a uniform particle size. The output products created can often be sold as is, or be sent for further processing through additional equipment (granulators briquetters etc). Throughputs typically range between 300kg/hr – 5,000kg/hr+ depending on the machine model, material type, screen size and application.
Single Shaft Shredder (Kroko Series)
Categories : Crushing, Shredding & Granulating Equipment
Cost Effective Precision Installed with STM gearbox made from Italy. Ensure the best effective precision and the higher torque density. High radial loads with high efficiency and great stability Equipped with professionally designed shaft and blades, it can withstand higher radial load and create higher efficiency while keep the best stability. GENIUS
Single Screw Squeezing Drying Machine
Categories : Washing & Classifying Lines
With a special designed screw, it is capable to squeeze wet material. Output Capacity: 500 ~ 1000 kg/hr (different material different output capacity). Can be put into pelletizer for granulating directly. Increase the capacity 60% more. 3% moisture left after drying (used Japan KETT moisture test machine).
Single Screw Pelletizing Extruder | CK-HS
Categories : Recycled Plastic Pelletizing Lines
CK-HS series Single Screw Extruder can be applied to wide applications, e.g., masterbatch, compounding, and recycling. The screw rotational speed is second only to our CK-DHS high-throughput series. Possible materials : PP, HDPE, LDPE, PS, ABS, ABS & PC, PC, PA, PET, PBT, etc. Extruder screw : The extruder screw of CYKF’s single screw extruder is customized to satisfy different material formulations. The optimal configuration of screw zones ensures high-efficiency extrusion performance. The strict quality management guarantees good quality and long service life of this critical component. Die : The die material and mold runner must be selected and designed according to the physical properties and characteristics of plastics to avoid occurrences of uneven material flow rate, retention, excessive molding pressure, in-mold temperature increase, decomposition and carbonization or other situations that may damage material properties of plastics.
CCS1030-STC Single Screw Lab-Scale Extruder
Categories : Extruders by Screw Configuration
Suitable for recycling, coloring, laboratory testing, and more.
GRM-H Compact single phase Power Controller up to 120A
Categories : Control Equipment / Systems
The features of GRM-H Series Power Controllers ensure efficient heating management even in the case of complex electrical loads, which require special features, as in the case of infrared lamps or Silicon Carbide heating elements. Compact size from 15A to 120A Load voltage 480V, 600Vac Digital IO-Link communication Configurable control mode Zero Crossing, Burst Firing, Half Single Cycle or Phase Angle Feedback V,I,V2, I2, P, Z Soft start and current limits Logic command Vdc, Analog, PWM or IO-Link Advanced partial load break diagnostics (1/8) Slave control output (Two-phase/Three-phase) Configuration and Diagnostics via smartphone App with NFC technology Calibration and alarm reset commands via Digital Input Overview The ability to propose customized control solutions allows to rapidly satisfy the most different automation needs. For this purpose, the GRP series provides a wide range of extremely compact SSRs, with a solid basic structure but scalable as current sizes (from 15A to 120A), control type and configuration features. Control An accurate process control is the condition to achieve a constant and a high-quality production. To reach this goal it is necessary to manage in the best way the different types of industrial heaters from linear resistances to infrared lamps. For this purpose, the new series of SSR provides a series of control functionalities (ZC/ /BF/HSC/PA/Softstart) fully configurable to adapt to the various needs. Diagnostics Preventing possible anomalies allows to limit or eliminate harmful downtime and production. The GRP series includes dedicated functions such as the HB alarm for partial load breakage with accuracy of 1/8 of the total load, SCR short circuit, overtemperature and power failure. IO-Link communication Factory digitization is reaching its final frontier, the field level of the automation pyramid. In this level IO-Link is confirming itself as the most suitable communication to easily reach devices such as sensors and actuators. From this perspective, the GRP series has been developed to be integrated within this automation architecture. NFC configuration Simple and safe commissioning, maintenance and quick diagnostics are now within the capabilities of devices like SSR. All this thanks to the NFC technology, which allows to extend the user interface using normal Smartphone or Tablet as intelligent configurators. Thanks to an intuitive graphical user interface, setup or diagnostics are particularly easy.