English - EN 
繁體 - ZH-TW 
简体 - ZH-CN 
Español - ES 
日本語 - JA 
العربية - AR 
Русский - RU 
Français - FR 
Fully Automatic Two Lanes Bottom Sealing Bag Making Machine LY-1400AF2
Categories : Plastic Bag Making Machines
Introduction LY-1400AF2 is a fully automatic, two independent lanes, free-tension, flying-knife bottom sealing bag making machine. It equips with two sets of servo motors working with two photocells for two-lane production with different settings. LY-1000AF and LY-1400AF for one lane production are available. Features High speed ,Free-tension, 2-lanes bottom sealing bag making machine. 2 sets of independent Servo-driven feeding systems with 2 sets of photocell for printed bag. Flying knife system for cutting. Up and down Sealing wires for efficient temperature control. Human-machine interface for easy setting.
Wire Impulse Bottom Bag Sealing Machine with Flying Knife Cutter
Categories : Plastic Bag Making Machines
The MGA-BSF-1000W/1400W is a wire impulse bottom bag sealing machine with flying knife cutter, designed for factories running high-thickness PE bottom-sealed bags. A European-brand temperature controller regulates the sealing wire band precisely, and a Japanese-made servo motor controls bag size.A specially designed flying knife cutter delivers a clean cut and perfect stacking of finished bags on the conveyor. The machine is available in two widths to suit different production needs, both handling film up to 0.6 mm total thickness at a liner speed of 60 meter/min.Models: MGA-BSF-1000W / MGA-BSF-1400WBag width: 100 - 1,000 mm / 100 - 1,300 mmBag length: 350 - 2,500 mmTotal thickness: Max. 0.6 mmOutput: Max. 80 cycle/minLiner speed (depend on size): 60 meter/minNet weight: 2,250 kg / 2,500 kgMachine dimension: 7,200 (L) x 1,550 (W) x 1,400 (H) mm / 7,200 (L) x 2,300 (W) x 1,400 (H) mm
LD/LLDPE Super High Speed Inflation Machine (GF-L85ES)
Categories : Blown Film Extruders
The GF-L85ES is the largest of the three GF-L ES super high speed blown film lines for LD and LLDPE film. It is specified for a maximum film width of 2200 mm and a maximum capacity of 240 KG/HR, using an 85 mm screw, a 100 HP driving motor and a 500 mm blown film die, with 8 ZONES of temperature control on the panel. The GF-L55ES and GF-L65ES cover the narrower widths in the same series. The tower fixed take-up unit has a 2300 mm roller width and runs at Max. 60 M/Min, and the single-station surface friction winder changes bobbins semi-automatically by pneumatic system. The same option list as the rest of the ES series applies, including stacked air ring, width control, corona treater, EPC or CPC edge control, oscillating take-up, double station winder, auto tension control, hydraulic unloading, heat-slitting, a second gusset unit, an in-line bag making or printing machine, and an edge-trim on-line re-use system for returning trim to the extruder. Material: LD/LLDPE Max. film width: 2200 mm Max. capacity: 240 KG/HR Extruder: 85 mm screw, 100 HP driving motor; 500 mm blown film die Temperature control: 8 ZONES Take-up: tower fixed type, 2300 mm roller width, Max. 60 M/Min Winding: single station surface friction type, semi-auto pneumatic bobbin change Options: stacked air ring, width control, corona treater, EPC/CPC, oscillating take-up, double station winder, hydraulic unloading, heat-slitting, in-line bag making/printing, edge-trim re-use
Tiny Inflation Machine (TINY-28)
Categories : Blown Film Extruders
The TINY-28 is a laboratory-scale blown film machine for HD, LD and LLDPE resin, intended for lab use and color testing and for producing small, thin film samples. It is the middle size of three, between the TINY-25 and the GF-HMM28. The extruder uses a 28 mm screw feeding a 40 mm blown film die, and temperature is controlled in 3 ZONES. Maximum film width is 200 mm at a maximum extrusion output of 8 KG/HR. The take-up unit has a 300 mm roller width and the single-station surface friction winder has an effective width of 200 mm. Because the machine is used for resin and masterbatch trials rather than production, JANDI'S notes that specifications can be changed to the customer's requirements. Application: lab use, color testing, small and thin film Material: HD/LD/LLDPE resin Max. film width: 200 mm Max. extrusion output: 8 KG/HR Extruder: 28 mm screw; 40 mm blown film die; 3 ZONES temperature control Take-up roller width 300 mm; winder effective width 200 mm
LD/LLDPE Super High Speed Inflation Machine (GF-L65ES-1)
Categories : Blown Film Extruders
The GF-L65ES-1 belongs to the GF-L ES super high speed series for LD and LLDPE film, positioned above the standard GF-L line for wider film and higher output. In the 65 mm size the line is rated for a maximum film width of 1600 mm and a maximum capacity of 180 KG/HR, with a 65 mm screw driven by a 75 HP motor and a 350 mm blown film die. Temperature is controlled in 7 ZONES from the control panel. The take-up unit is a tower fixed type with a 1600 mm roller width and a take-up speed of Max. 60 M/Min. Winding is single station, surface friction type, with semi-automatic pneumatic bobbin change. The option list is extensive: auto loader, pressure gauge, die rotating unit, LD/LLDPE die and air ring, stacked air ring, width control, corona treater, embossing roller, air chiller, vertical or horizontal oscillating take-up, edge or center position control (EPC or CPC), manual winder with air shaft, double station winder, auto tension control, hydraulic unloading, heat-slitting, second gusset unit, in-line bag making or printing machine, edge-trim winder and an edge-trim on-line re-use system. Material: LD/LLDPE Max. film width: 1600 mm Max. capacity: 180 KG/HR Extruder: 65 mm screw, 75 HP driving motor; 350 mm blown film die Temperature control: 7 ZONES Take-up: tower fixed type, 1600 mm roller width, Max. 60 M/Min Winding: single station surface friction type, semi-auto pneumatic bobbin change Options: stacked air ring, width control, corona treater, oscillating take-up, EPC/CPC, double station winder, auto tension control, in-line bag making/printing, edge-trim re-use
Blow Molding Machine Plastic Auxiliary Solutions
Categories : Turnkey & Auxiliary Integration Solutions
For blow molding mechines, we can supply a wide variety of auxiliary equipment, e.g.: hopper dryers, dehumidifying dryers, chillers, PET crystallizers, vacuum loaders, mold temperature controllers, master-bacth feeders and auto dosing and mixing systems. Better company image Greater productivity Lower cost Better energy efficiency Less material waste and pollution during the conveying process Better working environment Less noise due to the separation of the blowers from the working place
Rubber Dispersion Kneader
Dispersion Kneader HD Type This Dispersion Kneader is suitable for processing single or mixing numerous raw materials, including natural, rubber, syntetic rubber, plastic and more. The model has a sturdy construction. It features a large mixing capacity, high speed, excellent performance, fully automated temperature control, a simplified operating process, labor savings, and stable product quality. A rear input, front output design results in smooth-flowing production and back window design allows observation of mixing conditions. Its sealed mixing chamber ensures safe operation and eliminates the environmental pollution problem. The mixing chamber has a 180° dumping inclination for easy removal and changing of coloring ingredients. The machine is easy to install and requires no special foundation. Production can be changed at any time. It features a durable, low failure rate, and easy maintenance. Its a ideal mixing equipment (Mixer).
Air Chiller (YBA)
Categories : Cooling & Heating Equipment
Suit for environment temperature below 43℃. Adapt high performance compressor imported from Europe, America and Japan of all range models. Work with high efficiency of shell-pipe cooler to significantly improve energy save of EER. LCD temperature display by digital temperature controller and error indicator and more safety protecting devices. Fin evaporator with filter avoid dust and improve operating efficiently. Cooling faster and better and easy maintenance. Applied Machinery: oil temperature, ultrasonic, high frequency machine／injection／extrusion／blow molding machine
Signal Transmitter
Categories : Sensing, Monitoring & Inspection Equipment
Others ProductsARICO - The Best Solution Of Others Products ARICO Technology and worldwide's rubber and plastic injection industry manufacturers have cultivated a long and stable co-operation relationship between us for many years. We was founded in 1987, base on sophisticated manufacturing technology, and focus on the research and development and innovation of industrial control instrument technology. We are not only good at producing customized precision Others Products and related application equipment, but also provides high-quality Others Products with the most convenient setting mechanism, stable quality, at a reasonable price to manufacturers in Taiwan, China, the United States, India, Argentina, Israel, Mexico, Thailand, Malaysia, Southeast Asia and other countries. In addition to accumulating and stabilizing partners for related instruments with Others Products, ARICO continues to conduct research and development in order to provide more stable and efficient machine stability, just for achieving a higher efficiency and stable instrument technology level on temperature control, displacement sensing, pressure sensing, injection molding machine IoT on rubber and plastic industry.
Bag-on-Roll Making Machine(GF-R/SV Series)
Categories : Plastic Bag Making Machines
The GF-R/SV series is a servo drive semi automatic bag on roll making machine that converts film into perforated bags wound on a roll, such as produce bags and bin liners. The series runs from the GF-R611E/SV through the GF-R1212E/SV. Single-line models cover maximum cutting widths of 600 mm, 800 mm and 1000 mm, and two-line models cover 400 mm, 500 mm and 600 mm per line, so the same platform handles both wide single bags and narrower bags made two-up.Maximum cutting length is 1000 mm, with longer lengths available on request as an option. Maximum production is 120 pcs/min on the smaller sizes and 100 pcs/min or 80 pcs/min on the larger and two-line models. Sealing is by a tension sealing type knife on a silicon roller base, perforation by a teeth knife or band saw, and each machine includes a temperature controller and a printing scanner for registration to printed film.Type: servo drive semi automatic bag on roll making machineModels: GF-R611E/SV to GF-R1212E/SVMax. cutting width: 600 mm, 800 mm, 1000 mm (1 line); 400 mm, 500 mm, 600 mm (2 lines)Max. cutting length: 1000 mm; longer on requestMax. production: 120 pcs/min, 100 pcs/min or 80 pcs/min by modelSealing knife: tension sealing type; sealing base: silicon rollerPerforated knife: teeth knife or band saw; printing scanner and temperature controller included
Connector - CON006
Categories : Control Equipment / Systems
ARICO - The Best Solution Of Others Products ARICO Technology and worldwide's rubber and plastic injection industry manufacturers have cultivated a long and stable co-operation relationship between us for many years. We was founded in 1987, base on sophisticated manufacturing technology, and focus on the research and development and innovation of industrial control instrument technology. We are not only good at producing customized precision Others Products and related application equipment, but also provides high-quality Others Products with the most convenient setting mechanism, stable quality, at a reasonable price to manufacturers in Taiwan, China, the United States, India, Argentina, Israel, Mexico, Thailand, Malaysia, Southeast Asia and other countries. In addition to accumulating and stabilizing partners for related instruments with Others Products, ARICO continues to conduct research and development in order to provide more stable and efficient machine stability, just for achieving a higher efficiency and stable instrument technology level on temperature control, displacement sensing, pressure sensing, injection molding machine IoT on rubber and plastic industry.
“Large Flow” Water Heaters - STM-WF
Categories : Control Equipment / Systems
STM-WF series "Large Flow" water heaters are used to heat up the mould and maintain temperature, although they can be used in other similar applications. High temperature water from the mould is returned to the cooling tank and cooled by direct cooling. It is then pressurized by the high-pressure pump, sent to the heating tank and finally to the mould with a constant temperature. The HANYOUNG temperature controller can maintain an accuracy of ±0.5℃.
