Classification : Horizontal Cutting Machine
Country: Taiwan
Phone: 886-2-23956686
Fax: 886-2-23217266
Contact Person: Ken Hwang
Working Width | 1200 mm |
Cutting Height | 250 mm |
Cutting thickness | 0.3 - 150 mm (depends on the type of material, in step of 1/10mm) |
Cutting Length | 2000mm |
Cutting Speed | Approx. 0- 60 m / min |
Grinding Stone. | Dia. 255 mm cup |
Cutting precision | ±0.1mm |
Motor | Approx.29kw |
The foam is placed on the special-designed table with suction unit under the table, preset the cutting thickness form the monitor. After splitting off, sheets are taken away by hand. The machine consists of solid and strong construction of cast steel. It is equipped with large diameter knife pulley, thick and solid precision blade guide. The two sets of grinding units allow the bandknife to be grinded continuously. The grinding unit includes an auto system that protects the blade by withdrawing the grinding stones when the blade stops, preventing wearing down of the blade. The angle of the blade guide can be adjusted to different cutting thickneses for various materials. The table is equipped with vacuum system to ensure the foam material from moving during operation.