Vertical Trimming Station

Classification : Vertical & Angle Cutting Machine

SUNKIST CHEMICAL MACHINERY LTD.

SUNKIST CHEMICAL MACHINERY LTD.
Country: Taiwan
Phone: 886-2-23956686
Fax: 886-2-23217266
Contact Person: Ken Hwang
This station combines with four sets of cutting units. The bottom holder of cutting units base are equipped with motors and screw rods which drive these cutting units forward and backward. The distance of moving forward and backward of cutting units is controlled from the control box.
Between two cutting units, there is a 4 m Horizontal roller type conveyor and a 1 m vertical free roller conveyor for carrying and holding the block. When long block is delivered from the transfer conveyor for the two side of vertical cutting unit for trimming long block side skin.
The third set of vertical separator unit can move forward to the middle of cutting station and cut the foam block into half while the conveyor belt is moving forward.

The cutting blade for fourth set of cutting unit is 90° twisted. It can be used as a block cutter for cutting long block into needed size


Two side trimming unit

Conveyor Working Width

2200 mm

Conveyor Height

820 mm ( From the ground to working table )

Two Side Skin Trimming Working Range

0 - 12”

Two Side Trimming Height

1.2 m

Roller Conveyor Length

2 m

Power require

Approx.8.2kw

Separator

Working height

1.2 m

Working range

0 - 1.5 m

Power require

Approx.4.2kw

Block cut-off unit

Working height

1.2 m

Working width

2.2 m

Power require

Approx.5.6kw

CONTACT SUPPLIER