1. Production using old equipment is complicated and wastes time to remove and adjust the head of the hot welding machine. The PE Tarpaulin whole production plant starts with hot welding, hemming, eyelet punching and finishes with cutting of the fabric and automatic counting. Low labor required and high output.
2. Auto Hot Air Welding with Rope Insertion Machine Model: LS-101
This hot air welding machine is able to fold each edge of the fabric and feed the rope at the same time.
3. Hot Air Welding Machine Model: LS-201
The LS-201 welding machine combines two different fabrics in one piece. The surface of the fabric can be very smooth because we use water cooling before the fabrics become creased, and press using a rubber wheel.
4. Auto Hot Air Welding and Rope Insertion Machine Model: LS-601
LS-601 combines the LS-201 hot air welding machine and the LS-101 Welding and rope insertion machine.
5. Auto Eyelet Punching Machine Model: LS-5701
Use Ø17~ Ø28 mm iron eyelets with L5-571 auto eyelet puncher.
6. Auto Eyelet Punching Machine Model: LS-701
Use iron, aluminum and copper eyelets with the LS-701 auto eyelet puncher.
7. Mini Auto Movable Hot Air Welding Machine Model: LS-6003
|HDPE Laminated Tarpaulin|
|Max. Weight of Un-Winder||
(The tension of each fabric can be same because controlling by air compressor)
|Speed of Welding||
Max. 30 meter/min.
(depends the thickness of material)
|Rope Size||Ø 3 mm ~ Ø 6 mm|
|Max. Width of Tarpaulin||Customization|
|Coating Width||35 mm|
|Speed of Eyelet Punching||
6 meter/min ~ 12 meter/min
(depend the distance of two eyelet and length of cutting length)
The distance and quantity of eyelet are controlled by human machine interface.
Max. 180 meter/min
The cutting length is controlled human machine interface
|Requested Air Compressor||20HP|
|Specifications are for reference only and subject to change without further notice.|