Wet Laminating Machine - FLM-WET

Classification : Laminating Machine-Laminator

HCI CONVERTING EQUIPMENT CO., LTD.

HCI CONVERTING EQUIPMENT CO., LTD.
Country: Taiwan
Phone: 886-4-2359-0632
Fax: 886-4-2359-0710
Contact Person: Mr. Alan Ho
  • Unwinding Section
    • Lift-up & fixed type unwind stand with 3" air shaft.
    • The unwind tension is sensed by load cell and compared to the set tension. The control system will increases or decreases tension according to the calculated the tension difference automatically.
  • Coating Section
    • Steel coating roller incorporated with pressurized rubber roller assures extremely uniform coating thickness and surface smoothness.
    • Glue tank with pneumatic ascend/ descend device.
  • Laminating Section
    • Equipped with pneumatic laminating pressure roller ensure the laminating quality.
    • The motor speed and tension are synchronized in motion which improves laminating quality and stability.
  • Drying Section
    • Four zones and straight dryer provide superior drying performance.
    • 3 different options of drying: Electric heating & Thermal oil & Gas heating.
    • Tension problems during the drying process are eliminated by use of the micro location offset via dancing roller control systems, which allow for foil (6 micron) to laminate with other various films. It provides the most stable tension even the material has passed through the dryer and been affected by the temperature.
    • Equipped with auto temperature controllers and waste gas exhausted disposal system.
    • All rollers are driven by chain preventing from material scraped.
  • Rewind Section
    • Rewind is driven by motor providing the most accurate control.
  • Man-Machine Interface Control of FLM-Wet Laminating Machine
    • LCD colorful touch screen and simple figure display for setting.
    • Unwind & drying & rewind tension auto control.
    • Meter reached auto stop function.
    • Unwind auto stop and material exhausted stop function.
    • Parameters memory function.
  • Optional Accessories
    • Center guiding type web guider.
    • 1 color printing device including waste gas disposal system.
Specifications FLM- 1000 Wet Laminating Machine
Mechanical Speed (m/min) 0-150
Primary & Secondary Unwind Stands Shafted Type
Unwind Core Inner Diameter (mm) 76 / 3"
Unwind Web Width (mm) 500 - 1,000
Maximum Unwind Diameter (mm) 1,150 (Primary) / 600 (Secondary)
Coating method Rubber Roller Adhesive Coater
Drying System Electric Heating / Thermal Oil / Gas Heating
Laminating Steel Roller + Pressurized Rubber Roller
Rewind Stand Shafted & Surface Winding Type
Rewind Core Inner Diameter (mm) 76 / 3"
Maximum Rewind Diameter (mm) 1,000