Dynisco BenchMark™ Sensors: PTx, MDx, SPX, and Guardian Series

Classification : Sensors

MITSUDELL CO., LTD. - Dynisco New Agent Aboard

MITSUDELL CO., LTD. - Dynisco New Agent Aboard
Country: Taiwan
Phone: 886-4-2631-3001
Fax: 886-4-2631-7717
Contact Person: Harrison Chang


  • Accuracy better than ±0.5%
  • DyMax® coated stainless steel wetted parts
  • Proven sensor design
  • 0 - 500 to 0 -30,000 psi
  • Internal 80% shunt calibration


Combined Error  ±0.5% FSO,(Including Linearity, Repeatability & Hysteresis)
Repeatability: ±0.2% FSO
Over Pressure 2 x FSO or 35,000 psi
(whichever is less)
Configuration Four active arm bonded Wheatstone bridge strain gage
Bridge Resistance: Input: 345 Ohms minimum; Output: 350 Ohms ±10%
Output  3.33 mV/V ±2.0%
Zero Balance ±10% full scale
Input Voltage 10 Vdc recommended, 12 Vdc maximum
Internal Shunt Calibration (R-Cal): 80% FSO ±1.0%