Blow Molding Machines
- Accumulator Head Blow Molding Machines
- Automatic Blow Molding Machines
- Continuous Extrusion Blow Molding Machines
- Crystallizing Machines
- Extrusion Blow Molding Machines
- Injection Blow Molding Machines
- Injection Stretch Blow Molding Machines
- PET Stretch Blow Molding Machines
- Semi-Automatic Blow Molding Machines
- Stretch Blow Molding Machines
Preform In-feed and Unscrambler：
Orientation and delivery of preforms is in an orderly fashion to the machine. Accurate position control of preform is achieved by pneumatic system.
Bottle Discharge System：
Bi-axially oriented bottles from the moulds are picked up by robotic arms and placed in an upright position. The in-line conveyor or leaks testing system are optional equipped.
Accurate temperature control of infrared heaters in various zones of the oven is achieved by electronic control. Rotating preform holding mandrels enables the circumference of preform at each zone to be evenly heated.
Touch Screen Control System：
Computer touch screen with the PLC system. All actions of the machine can be seen on the screen. System is available for many sets of memories. The system diagnoses and displays the problems on the screen to make trouble shooting easier.
|Container||Max. neck diameter||mm||Ø25~Ø33|
|Max. production capacity||pcs/hr||3000||4000||6000|
|Max. body diameter||mm||65|
|Max. container height||mm||250|
|Max. bottle capacity||ml||600|
|No. of cavity||no.||3||4||6|
|Mould center distance||mm||76.2|
|No. of preform mandrels||pcs||57||64||102|
|Heating oven||No. of even||no.||2||2||3~4|
|No. of infrared heaters in each oven||no.||6|
|Heating load (max.)||kw||20||20||29~38.4|
|Air pressure||Low pressure||kg/cm2||7|
|Cooling water||Cooling capacity||kcal/h||18000||18000||24000|
|Total consumption power||kw||22||22||33~43|
* All Specifications and designs are subject to change without notice.
* The production capacity refers to 500ml water bottles.
* CMA Series model can be upgraded to fully electricity type by servo motor control.