Vertical 3-TIE BAR Rotary Injection Machine

Classification : Vertical Injection Molding Machine

KING'S SOLUTION CORP.

KING'S SOLUTION CORP.
Country: Taiwan
Phone: 886-3-321-8768
Fax: 886-3-321-8769
Contact Person: Sheila Su
• Vertical direct hydraulic clamping system is designed for accurate, safe operation, especially suitable for insert molding.

• With double slide table or rotary design, put-in, take-out products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production.

• High precision mold platen ( Parralelism/ flatness : 0.01/100mm), heavy-duty tie-bars, and low-pressure mold clamping work together to greatly extend machine & mold life.

• Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance. • Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks.

• All series adapted Variable pump +PQ valves enable energy savings of 30~50%.

• Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life.

• Low oil temperature, durable parts, high speed injection, and quiet operation.

• Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine.

• All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.

MODEL K75-10DV-1 K360-110-25DV-1 K410-180-40DV-1
Inj sys
Screw Diameter mm 24 28 30 22 28 34 26 32 40
Injection Pressure kgf/cm² 1960 1440 1250 2330 1800 970 2330 1540 980
Injection Capacity cm³ 38 52 60 46 74 110 74 113 176
Injection Weight (PS) oz 1.56 2.1 2.4 1.9 3 4.4 3 4.6 7.1
Injection Rate cc/s. 27 37 42 31 50 74 51 77 120
Clamping sys
Clamping Force tf 10 25 40
Clamping Stroke mm 200
Max. Mould Space mm 235 400
Min. Mold Height mm 35 200
Overall Size of Platens (H*V) mm 440*220 500*290 560*300
Space Between Columns (H*V) mm 300 360*150 410*150
Ejector Force tf 0.7 (2.7) 0.7 (2.7) 0.9 (2.7)
Ejector Stroke mm 21 (40) 25 (40) 40 (40)
Platen Moving sys
Moving Type N/A Rotary Rotary Rotary
Moving Plate Stroke mm 220 300 300
Size of Moving Plate (H*V / DIA) mm ø600 ø780 ø880
Stations sets 2~4 2~4 2~4
Others
Drive Motor (with Variable pump) kw(HP) 3(4HP) 3.7 (5HP) 5.5 (7.5HP)
Heater kw 3.4 3.4 5.6
Dimension of Machine (L*W*H) m 1.1 * 0.9 * 2.3 1.1 * 1.5 * 2.3 1.1* 1.5 * 2.3 1.6 * 1.2 * 2.7 1.6 * 1.5 * 2.8 1.7 * 1.6 * 2.8 1.8 * 1.4 * 3.0 1.8 * 1.7 * 3.1 1.9 * 1.8 * 3.1
Weight of Machine t 0.6 0.8 1 1 1.2 1.4 1.6 1.7 2
MODEL K460-250-55DV-1 K520-250-80DV-1 K220-100DVR-1-S60
Inj sys
Screw Diameter mm 31 38 44 30
Injection Pressure kgf/cm² 2471 1630 1210 0
Injection Capacity cm³ 106 159 213 99
Injection Weight (PS) oz 4.3 6.4 8.6 6.2
Injection Rate cc/s. 48 72 97 -
Clamping sys
Clamping Force tf 55 80 120
Clamping Stroke mm 200 250
Max. Mould Space mm 400 600
Min. Mold Height mm 200 -
Overall Size of Platens (H*V) mm 610*400 700*560 -
Space Between Columns (H*V) mm 460*240 520*300 -
Ejector Force tf 0.9 (2.7) 0.9 (2.7) 4
Ejector Stroke mm 40 (40) 50 (50) 160
Platen Moving sys
Moving Type N/A Rotary Rotary -
Moving Plate Stroke mm 350 350 -
Size of Moving Plate (H*V / DIA) mm ø980 ø1200 -
Stations sets 2~4 2~4 2
Others
Drive Motor (with Variable pump) kw(HP) 6 (8HP) 6 (8HP) 15
Heater kw 6 6 9
Dimension of Machine (L*W*H) m 2.0 * 1.6 * 3.2 2.0 * 1.9 * 3.3 2.1 * 1.9 * 3.3 2.2 * 1.8 * 3.4 2.2 * 2.1 * 3.5 2.4 * 2.4 * 3.5 2.6 * 1.5 * 3.5
Weight of Machine t 2 2.3 2.7 2.2 2.6 3.2 6