Two Platen Hydra-Mech Injection Molding Machine

Classification : Giant


Country: Taiwan
Phone: 886-6-5950688
Fax: 886-6-5951120
Contact Person: Mr. John Hsieh
The following specifications are for your reference only and can not be used as the machine acceptance criteria. Please contact with our sales representatives to confirm the most appropriate machine features.

The features are for your reference only. Due to continuous improvements, we reserve the right to amend any of the above 
specifications without prior notice.
.The clamping unit adopts advanced design to make sure the platens parallel while they are moving. The high-pressure clamping control adopts Germany Rexroth's control parts. This makes the clamping force very precise and protects the mold and the machine. 
.The mold clamping stroke and the capacity are bigger than traditional machine. It makes the machine suit to produce more kinds of product especially the barrel with deep depth. 
.The machine is shorter than the traditional machine. This makes the machine needs smaller space and the factory can be use more efficiently. 
.The machine can provide stable clamping force steadily while injecting. The molding will be done with higher yield rate. 
.There is no toggle structure need for the LM series. The clamping unit needs less lubrication and the maintain cost and     pollution will be lower. 
.The mold opening speed is fast which less the molding cycle time. 
.Mold is protected while low pressure which longer the mold life. 
.Newly designed injection unit will provide precise injection. 
The LM series of FCS will be promoted to the auto parts industry and big container producers due to its specific features. There will be different clamping force from 1600 tons to 3500 tons available.