C Type Double Shuttle Table Injection Molding Machine

Classification : Machine and Solution


Country: Taiwan
Phone: 886-3-321-8768
Fax: 886-3-321-8769
Contact Person: Sheila Su
• Tie-bar less (C type) design gives more space for operation. Especially suitable for the powercord and connector with wire.

• With double slide table or rotary design, put-in, take-out products and molding finish at the same time, which is more safe and efficient for production , then reduce the cost of production.

• High precision mold platen ( Parralelism/ flatness : 0.01/100mm), heavy-duty tie-bars, and low-pressure mold clamping work together to greatly extend machine & mold life.

• Nitride and NIP/ Nitroflon coated screws and barrels are long-lasting, robust and provide superior acid/alkaline resistance.

• Heavy-duty double cylinder injection unit is maintenance friendly and free of oil leaks.

• All series adapted Variable pump +PQ valves enable energy savings of 30~50%.

• Proportional hydraulic control system provides low noise, low energy consumption, and smooth machine movements with durable life.

• Low oil temperature, durable parts, high speed injection, and quiet operation.

• Controller can record the production conditions such as temperature, pressure, flow, position available on the panel, reducing adjust of machine.

• All machine with compact , space-saving design, reduce the heavy burden of the floor of factory.
MODEL K110-20DC-2
Inj sys
Screw Diameter mm 24 28 34
Injection Pressure kgf/cm² 2330 1710 1160
Injection Capacity cm³ 50 68 100
Injection Weight (PS) oz 2 2.7 4
Injection Rate cc/s. 31 42 62
Clamping sys
Clamping Force tf 20
Clamping Stroke mm 155
Max. Mould Space mm 305
Min. Mold Height mm 150
Overall Size of Platens (H*V) mm 340*220
Space Between Columns (H*V) mm *
Ejector Force tf  2.7
Ejector Stroke mm 40
Platen Moving sys
Moving Type N/A Sliding Rotary
Moving Plate Stroke mm 400  
Size of Moving Plate (H*V / DIA) mm 750*220 ø600
Stations sets 2 2~4
Drive Motor (with Variable pump) kw(HP) 3.7 (5HP)
Heater kw 5
Dimension of Machine (L*W*H) m 2.1 * 1.0 * 1.6 2.1 * 1.2 * 1.6
2.3 * 1.2 * 1.6
Weight of Machine t 2 2.2 2.4

Standard Equipment List
Clamping Unit Low pressure protection for clamping
Control Controller (IPC / Single chip with double CPU)
Hydraulic Unit Varlable pumps + PQ valve
Injection Unit Multi-stage injection control
Nozzle forward position to confirm
Others Auto purge
Return Oil filter device
Over-heat protection for oil & plastic
Cooling system

Options List
Clamping Unit Shuttle table
Rotary table (Hydraulic / Sevo-motor)
Core device
Electric eye & Light curtain safety device
Air blow of mold
Pressure sensor
Injection Unit Bi-metal screw & barrel / Nitroflon surface trearment
Shut-off nozzle
Ceramics heater band
Others Chiller
Mold temperature controller
Warm up function for hydraulic oil
Dehumidifying dryer
Automatic vacuum loaders
Hoper dryer
Robot & Automatic device