Blow Molding Machines
- Accumulator Head Blow Molding Machines
- Automatic Blow Molding Machines
- Continuous Extrusion Blow Molding Machines
- Crystallizing Machines
- Extrusion Blow Molding Machines
- Injection Blow Molding Machines
- Injection Stretch Blow Molding Machines
- PET Stretch Blow Molding Machines
- Semi-Automatic Blow Molding Machines
- Stretch Blow Molding Machines
Low pressure molding is a new injection molding process in recent years.
Low pressure molding production is a process uses hot liquidify Polyamide material.
Our research team make their efforts on the designing of low-pressure machine, King's Solution Corp. recently have 5 new patents (i.e. Taiwan patents no. M496549, M525837 and M530471), (China patents no. ZL201420646124.2 and no. ZL201420647977.8).
Our LPM Low Pressure Molding Machine, CE marking certified, with its very low injection pressure 20~500psi (1.5~35 BAR) into the mold cavity and electronic parts to be encapsulated. Hot-melt Polyamide starts cooling down when it touches the cavity, then apply continuous injection pressure. The over-molding process will not harm any fragile solder joint of the circuit board (PCB Over-molding). At first, it's uses to replace toxic and bulky conventional potting processes, gradually spread to the world in market such as automotive market, medical, military, domestic appliance market.
Low pressure molding leads the way to protect fragile electronics components against moisture, dust-proof, moisture proof, insulation, temperature resistance, flame retardant, vibration reduction, well bonding, waterproof etc. Suitable for electronic components such as micro switches that require waterproof function, automotive electronic sensor.
Best for PCB Overmolding, Waterproof Cable Overmolding, Waterproof Micro Switch.
- Machine driven by compressed air and servo motorised, energy saving, specially for clean room and laboratory.
- The Pressure adjusting valve control the pressure of injection.
- TWO PID thermal temperature control zones(Melting tank and nozzle).
- Teflon coated melting tank made from Aluminum alloy, heated evenly & rapidly, much easier to clean.
- Nozzle connected to melting tank, injection unit driven by air pressure.
- Nozzle directly connected to gear pump and no heating pipe, avoid crystallization.
- Two tie-bar design for molding small parts, operation easily.
- Sealing cover, Safety Light curtain, pneumatic door and dual palm safety button for personnel safeguard.
- Multi-Language PC Base industrial type Linux core system.
- 1000 sets of mold settings can be stored and export as backup.
- Complete record of history settings & warnings. Built in USB connect.
- On-line control and maintenance service.