Slitter Rewinder Superior Type-FSL-T | Rewinders | Post Processing Machines

Slitter Rewinder Superior Type-FSL-T
Country: Taiwan
Phone: 886-4-2359-0632
Fax: 886-4-2359-0710
E-mail: alan@hci-tw.com.tw
Contact Person: Mr. Alan Ho
Share to: FacebookTwitterGoogle+
SHAFTLESS & PNEUMATIC-CHUCK UNWIND STAND
The left and right unwind arms are driven by motor; the operator can adjust the width freely.
Equipped with pressure chuck for clamp the parent roll quick and easy.
Unwind control panel.
Single operator is required to manipulate and load the parent roll.

WEB GUIDING SYSTEM
Whole unwind stand can move horizontally, left and right each 50 mm. It can ensure the accuracy of slitting position.
The guiding operates in two modes:Web edge & Printing line guiding

THREE MOTORS WINDING (Standard on T Slitter Rewinder)
Three individual motors: One motor drives upper rewind shaft, one drives lower rewind shaft and the third motor is connected to the main drive roller.

UNWIND AUTO TENSION CONTROL
The unwind tension is sensed by load cell and compared to setting value. The PLC will increase or decrease it according to the calculating difference automatically. It can maintain the stable tension output during whole slitter operation.

PNEUMATIC NIP RUBBER ROLLER
Tension isolation point through pneumatic nip rubber roller, giving perfect isolation between the unwind and rewind. It also ensures no slippage or scratches when Slitter running.

DUO SLITTING TECHNIQUES
Razor in groove roller & Shear knifes.
Equipped with shaft tracks, ease for installation.
Equipped with protecting cover, prevent personal injured.

VACUUM TYPE TRIM DISPOSAL 
All FSL-T Slitter are equipped with vacuum type trim disposal. Specially designed ejectors with powerful ventilators remove the slit edge of web.

ANTI STATICS BRUSHES 
Anti statics brushes discharge electrostatic charge when plastic material is being slit and rewound. There are two sets of anti statics brushes, one prior to upper rewind shaft, the other prior to lower rewind shaft.

HCI DIFFERENTIAL WINDING TECHNOLOGY 
Automatic calculation control for rewinding tension, employs HCI's self-developed precision friction rewinding ring, combined with automatic side-pressure compensation. Two independent rewinding motors and an intelligent rewinding diameter control system assure extremely stable rewinding tension without the need to adjust it when speed and diameter varied.

INDIVIDUAL LAY-ON ROLLER 
Equipped with 4 sets of independent lay-on roller. It can adjust the position and width according to the actual slit rolls. It guarantees full contact between lay-on roller and slit roll. To built the good slit roll structure.

PRODUCTS DISCHARGE DEVICE
Equipped with products discharge device: helps heavy rolls unloading as well as efficiency during slit roll exchange.

PLC - PROGRAMMABLE LOGIC CONTROLLER
Upgrade to Servo motors driven is available for FSL-T Slitter.
LCD colorful touch screen.
Dialogue parameter setting environment.
Parameters memory function.
Tension computes function.
Unwind auto stop and break stop function.
Meter reached auto stop function.
Upper and lower rewind shaft different winding direction function.
Rewind tension auto increase function.

Specifications

FSL-T1300 Slitter Rewinder

Mechanical Speed (m/min)

300

Unwind Stand

Shaftless with Pneumatic Chuck & Floating Type

Core Inner Diameter (mm)

76 / 3" or (152 / 6" Optional)

Web Width (mm)

320 - 1,300

Maximum Unwind Diameter (mm)

1,000

Web Guiding System

Printing Line / Edge

Guider Movement (mm)

+/- 50

Slitting Techniques

Razor In Groove Roller / Shear Knives

Trim Removal

Vacuum Type Trim Disposal

Minimum Rewind Web Width (mm)

50

Maximum Rewind Diameter (mm)

600