NR-100 Vacuum Type Oil Seal Trimming Machine | Bending, Folding and Edge Trimming Machines | Post Processing Machines

NR-100 Vacuum Type Oil Seal Trimming Machine
Share to: FacebookTwitterGoogle+
•  Manual feed and auto trim.
•  The vacuum will suck the oil seal through the mold during the cutting period.
•  There are many cutting mode for the user to choose. To cut the inner and outer flash simultaneously.
•  The s flash separator and blowing plate will separate the flash from the trimmed seals to shorten the processing time.
Weight (kgs) 280
Dimensions (cm) 90(L) × 90(W) × 190(H)
Cutting range (mm) O.D. 8 -100
Spindle speed (rpm) 2800
Capacity (pcs/min)  12-20 (Approx.)
Tooling pad size (mm) φ 32 and φ 79
cutting angle 30° - 70°
Cutting speed 2 stages, adjustable
Number of knives 2
Knife blade size (mm) 3×3 or 3×1.8 or 5×1.8
Motor 1/2 HP
Brake 1.0kgfm clutch brake 
Controller PLC