E-eries Injection Molding Machine | Horizontal Injection Molding Machines | Injection Molding Machines

E-eries Injection Molding Machine
Share to: FacebookTwitterGoogle+
● Once you set, then every thing is finished. 
● The WM501 micro-computer based control system offers both high speed, yet simple operation. The display of both production and engineering data with the latter being accessed by a password to prevent unauthorized access. For normal operation there are eight screen pages of data and all main parameters such as speeds, pressures, strokes, time intervals and temperatures can be set on the screen. As standard the internal memory can store data for up to twenty mould sets. 
● To expand the mould storage data external memory cards can be supplied as optional equipment, each capable of storing data for twenty mould sets. A voice synthesize is incorporated to give audible alarm messages.
● A further 6 screen pages are installed to give the following functions:
Abnormal alarm analysis
Mould number allocation
Input/output status
Print out setting (optional)
Pre-heat timing
Production quantity shut down
● Optional features available:
Display screen of enlarged size and with colour CRT
RS232 interface for connection to host computer
External memory card
Dynamic display of the machine hydraulic system including phase pressures etc.
INJECTION MODEL Unit E.555 E.655 E.855 E.1055
INJECTION Screw Diameter mm 75 80 90 85 95 105 95 105 115 105 115 130
Screw L/D Ratio L/D 22.4 21 18.6 22.3 20 18 22.1 20 18.2 21.9 20 17.7
Swept Volume cc 1811 2060 2608 2610 3260 3983 3614 4416 5297 4935 5920 7565
Max shot Weight (P.S.) g 1630 1854 2347 2349 2934 3584 3253 3974 4767 4442 5328 6809
oz 57.5 65.4 82.8 82.8 103 126 114 140 168 156 187 240
Max Injection Pressure bar 2116 1860 1470 2232 1787 1464 2057 1684 1404 2235 1863 1458
Max Injection Rate g/sec 338 385 487 470 587 717 583 712 854 705 845 1080
Screw Stroke mm 410 460 510 570
CLAMPING Max Locking Force tonne 555 655 855 1055
Max Opening Stroke mm 900 1000 1300 1500
Min Mould Height mm 300 400 500 600
Max Mould Height mm 1000 1100 1200 1300
Max Dayllght mm 1900 2100 2500 2800
Space between tie bars mm 800x600 950x950 1050x1050 1150x1150
Diameter of tie bars mm 145 160 180 200
Max Ejector forward Force tonne 15.8 18.58 21.50 24.70
Max Ejector Stroke mm 275 300 350 400
GENERAL Pump Drive Motor kw(HP) 75+5 100+5 125+7.5 165+7.5
Hydraulic Pressure bar 140 140 140 140
Heating Capacity kw 25 31 38 70
Number of Heating Zones qty 5+N 5+N 5+N 5+N
Oil Filling liter 1200 1200 1800 2000
Machine Dimensions(LxWxH) m 9.7x2.2x2.15 10x2.3x2.7 13x3.1x2.8 14x3.7x3.2
Machine Weight, dry. kgs 29,000 39,000 50, 000 66,000

 

INJECTION MODEL Unit E.1255 E.1655 E.2055
INJECTION Screw Diameter mm 115 125 140 125 140 150 135 150 165
Screw L/D Ratio L/D 21.7 20 17.8 22.4 20 18.6 22.2 20 18.1
Swept Volume cc 6439 7608 9544 8344 10467 12016 10449 12900 15609
Max shot Weight (P.S.) g 5795 6847 8589 7510 9421 10814 9402 12900 14048
oz 204 241 302 264 332 381 331 409 495
Max Injection Pressure bar 2089 1768 1410 2102 1675 1459 2112 1711 1414
Max Injection Rate g/sec 847 1001 1255 999 1253 1439 1175 1451 1755
Screw Stroke mm 620 680 730
CLAMPING Max Locking Force tonne 1255 1655 2055
Max Opening Stroke mm 1600 1800 2000
Min Mould Height mm 700 800 900
Max Mould Height mm 1400 1500 1600
Max Dayllght mm 3000 3300 3600
Space between tie bars mm 1275x1275 1500x1500 1700x1700
Diameter of tie bars mm 220 250 280
Max Ejector forward Force tonne 28.10 31.70 35.60
Max Ejector Stroke mm 450 500 550
GENERAL Pump Drive Motor kw(HP) 185+10 220+10 260+15
Hydraulic Pressure bar 140 140 140
Heating Capacity kw 80 95 105
Number of Heating Zones qty 6+N 6+N 6+N
Oil Filling liter 3000 3600 4200
Machine Dimensions(LxWxH) m 14.8x3.4x3.6 16.7x4.8x4.2 18x5.0x4.5
Machine Weight, dry. kgs 80,000 100,000 125,000