PRM-TAIWAN
Classification : Injection Robot
Country: China
Phone: 86-769-83180326 (237)
Fax: 86-769-83180329
Contact Person: Kathy Zeng
Inquiry Now
The New Titan series of robotic arms are used in 650-4000 tons of various plastic horizontal injection molding machines, 3-axis servo drive, arm for taking out products, and the upper and lower arm structures are double-cut. Used for quick removal or a variety of removal applications.

TN□□□□WS/S3
Model: 1500/1700/1900/2200/2500/3000/4000
W: double cut
S: single arm (finished arm)
S3: Three-axis servo (horizontal/finished arm up/down/extraction, optional pneumatic material arm)

TN Series General Specifications:


power supply
Power Source



working pressure
Working Pressure



Maximum allowable air pressure
Max.Allowed Pressure



Drive mode
Drive System



Side pose
Swivel



1Φ/3ΦAC220V±20V
50/60HZ



5Kgf/cm 2
0.49Mpa



8Kgf/cm 2
0.8Mpa



S5-AC Servo Motor
S3-AC Servo Motor



90° Fixed
Pneumatic


The T2200 and above models use three-phase power


Main specification:  

Model

TN1500
WS-S3
TN1700
WS-S3
TN1900
WS-S3
TN2200
WS-S3
TN2500
WS-S3
TN3000
WS-S3
TN4000
WS-S3
Power supply capacity (KVA)
2.7 2.7 2.7 5.4 5.4 5.4 7.2

Applicable molding machine (ton)

650-1000 800-1300 1000-1600 1300-2500 1600-3000 2500-4000 3000-6000
Horizontal travel (mm)
2400(2700) 2700 2700 3500 3200(4500) 4500 6000
Crosswise Stroke (mm) 1240 1320 1480 1550 1550 1860 2350
Up and down stroke (mm) 1500(1700) 1700(1900) 1900 2200 2500(3000) 3000 4000

Maximum load (Kg)
15 25 25 35 50 50 50
Take time (sec) 2.3 2.6 2.9 4.0 4.5 5.2 6.5
Full lap time (sec) 12 14 19 21 23 24 28
Air consumption (NI/cycle) 28 31 38 61 114 133 162
Net weight (Kg) 800 850 920 1600 2500 2800 3500
* Due to continuous improvement of the model, the appearance and specifications are subject to change without notice.


.