CM Series - Hydraulic RAM type CLF small Injection Molding Machines | Horizontal Injection Molding Machines | Injection Molding Machines

CM Series - Hydraulic RAM type CLF small Injection Molding Machines
Country: Taiwan
Phone: 886-6-2532111
Fax: 886-6-2533311
E-mail: clf@clf.com.tw
Contact Person: Claire Ding
Share to: FacebookTwitterGoogle+
•  Delivering Superior Results and Excellence.
•   Dual injection cylinder with both sides of piston rod defining the smooth moving line, reduces resistance Of the return oil, achieves high injection efficiency and accuracy. 
•   Injection unit swivel device for the convenience of changing screw and barrel. 
•   Multi-design screw rod to match with different resins’ requirements. 
•   Multi-design check ring. 
•   Forced exhaust fan to cool down the abrasion heat causes overheating, keeping stable production temperature. 
•   PID temperature control, barrel heating by SSR and nozzle control by SCR fro constant temperature. 
•   Ram piston fastened to the moving platen sliding under the guide of clamp cylinder makes for very good parallelism of the mold close and open movement. 
•   Adjustable rollers support the weight of mold and platen and distribute to all the area homogenously for long life operation. 
•   Advanced injection compression function-6 stages of product compression setting. 
•   3 layers of electrical and mechanical clamp safety devices for the operator. 
•   Advanced JD computer controller made in Japan. 
Machine Model CLF-50CM CLF-70CM CLF-100CM
International Code 500H-137 700H-205 1000H-395
INJECTION UNIT
Screw diameter mm 28 30 32 36 35 40 45
Theoretical Inj. Volume cm3 68 78 117 148 173 226 286
Injection Pressure kg/cm2 2009 1750 1750 1383 2285 1750 1382
Max. Injection Rate cm3/sec. 80 92 104 132 96 126 159
Shot Weight in GPPS Gram 61 70 105 133 156 204 258
Plasticizing Rate(GPPS) g/sec. 8.5 9.8 9.8 12.4 15.8 20.7 26.1
Screw Rotation Speed PRM 360 254 308
Heating Zones zone 5 5 5
Heating Capacity kw 3.4 6.5 7.45
CLAMPING UNIT

Distance Between Tie Bars (HxV)

mm 315 x 315 375 x 375 415 x 415
Dimensions of Platens. mm 460 x 460 550 x 550 600 x 600
Min. Mold Height mm 160 170 180
Mold Opening Stroke mm 390 430 520
Daylight mm 550 600 700
Clamping Force Ton(KN) 50 (495) 70 (690) 100 (985)
Ejector Stroke mm 60 80 80
Ejecting Force Ton(KN) 1.76 (17) 2.75 (27) 4 (39)
GENERAL DATA
Pump Driving Motor HP(kw) 20 (15) 25 (18.7) 30 (22.34)
Capacity of Hyd. Reservoir Liter 190 270 320
Machine Dimensions (L x W x H) m 3.4 x 1.2 x 1.66 4.0 x 1.2 x 1.63 4.65 x 1.2 x 1.63
Net Weight Ton 2.5 3.6 4.3