Automatic rotary type air blowing injection shoes making machine ( with automatic opening - mold system ) - LC-706 | Shoe Making Machines | Injection Molding Machines

Automatic rotary type air blowing injection shoes making machine ( with automatic opening - mold system ) - LC-706
Country: Taiwan
Phone: 886-4-22611341
Fax: 886-4-22612962
E-mail: lien.chiny@msa.hinet.net
Contact Person: Rucy Yang
Share to: FacebookTwitterGoogle+
Description :

Automatic rotary rotary type air blowing injection shoes making machine (with automatic opening mold system)
Model no: LC-706

The materials feeding volume and locating level are setting by optical sensor, and the individual feeding control for each station, make the finished product more perfect and stable the accurate of setting position can be only 0.1mm allowance.
The hydraulic controlled can be over 3 tons for the opening - mold pressure, the advantage is not only motion stable but also hydraulic circuit is by non-electric control system, it can reduce the mechanical problem.

  • Advanced Automatic Mold Opening Design
  • Full automatic mold pening is achieved by energy saving hydraulic circuit design, which can be used with both triangular and rectangular molds meeting the requirement of economic investment.
  • Full automatic plasticizing mode
  • Digital metering material volume control provides very good accuracy during plasticizing process.
  • Electricity saving mold clamping device
  • Electricity saving mold clamping device. This system saves energy by 30% than the traditional pressure-holding mold clamping style and prolongs the service life of hydraulic pump by using large hydraulic cylinder.
  • Hydraulic system
  • All are supplied by YUKEN.
  • Ejecting system
  • It makes the injected piece detached from the mold easily (such as PVC. ABS. PP and PE).
  • Multiple Functions
  • Used for triangular, quadrangle, and air facilitated apparatus injection mold and installed ice water-cooling system to provide optimum cooling effect, this machine meet all the needs in the current market.
  • Controller system
  • Using touch screen controller system from Hitachi Japan. Man-Machine Interface, program modifiable computer.
    TYPE

    UNIT

    LC-706

    STATION

    STATION

    16 / 20

    SCREW DIA.

    MM

    70

    75

    INJECTION RATE

    G/SHOT

    1015

    1165

    INJECTION PRESSURE

    KG/CM2

    800

    700

    DRIVE TYPE

    -----

    (OIL MOTOR)

    SCREW SPEED

    R.P.M.

    1-150

    CLAMPING FORCE

    TON

    72

    MOLD THICKNESS (MAX.)

    MM

    390*200*230

    HEATER CAPACITY

    KW

    9.5

    THERMOSTAT CONTROL

    ZONE

    4

    MOTOR

    HP

    30+5

    PRODUCTIVITY

    PCS / HR

    360

    MACHINE SIZE (L X W X H)

    CM

    510*249*272

    580*290*272
    PACKING SIZE (L X W X H)

    CM

    520*230*237
    590*230*237
    NET/GROSS WEIGHT

    TON

    8 / 8.7

    8.8 / 9.4