The Transfer Printing Machine For PVC Decorates Board AT-PR-1C | Heat-Transfer Printing Machines | Machinery and Plant for Printing, Marking, Decorating, and Finishing

The Transfer Printing Machine For PVC Decorates Board AT-PR-1C
Share to: FacebookTwitterGoogle+
● Special designed for printing on the PVC board, the maximum printing width is 240mm, and length is umlimited.
● Adopted square column with single elbow structure, strong pressure. The max pressure is 1200kgs.
● Equpped four wheels on the base plate to support the printing object, and each wheel equipped with the round shape clip, in order to make sure that the printing object could always go in the correct direction, and not slanting.
● Equipped the tension motor on the back of the foil received mechanism, in order to avoid the problem of wrinkle.
● All electric components are imported from Taiwan.
● The probe could measure the temperature accurately. This machine equipped with the roller protection device! When switch off the power, the rubber roller will rotate by it self about 30min to cool down, it will prevent the damage of the rubber roller.
● Durable, and reliable is the main future of this machine.
型式 MODLE AT-PR-1C
滾輪尺寸 Size of Silicon Roller Φ200*100m/m
電源及電熱 Power Source & Heating AC220V 2200W
溫度調節 Regulation Of Temperature 0-400℃
自動卷箔 Roller Leaf Feeding Device 0.5-170m/m
時間控制 Time Control 0-9.9s
氣缸直徑 Cylinder Diameter Φ100*100Φ63*150
最大壓力 Maximum Pressure 800kgs
最大開度 Maximum Gap 100m/m
型材厚度 Thickness of The Plastic Board ≤60m/m
機械重量 Weight 650kgs
機械尺寸 Dimensions L1700*W850*H2200m/m