Vertical Electric Injection Molding Machine-YE-50V

Classification : Special Machine

YUH DAK MACHINERY CO., LTD.

YUH DAK MACHINERY CO., LTD.
Country: Taiwan
Phone: 886-2-26946450
Fax: 886-2-26946454
Contact Person: Nina Tsai
  • A number of patented electric injection device
  • Precision electric injection function
  • Precision electric metering function
  • Electric pedestal does not slide function
  • Energy-saving hydraulic servo mold clamping function
  • Accurate low pressure off mode protection function
  • Energy-saving hydraulic servo thimble function
  • Template rust plating processing
  • Template parallelism fine tuning function
  • Template low-top design
  • With 8 T-groove, easy to fix the mold
  • Thick template with high tensile guide posts
  • Configuration template guide column anti-drip bumper sleeve
  • Configure mechanical closing safety bars
  • Configure mechanical shut-off safety electrical protection
  • Open all the safety gates to stop the design
  • Configuration key type safety door safety switch
  • Configuration rail horizontal operation safety gate design
  • Injection device can be flipped to maintain the factory accuracy to reduce the height of the handling method
  • Injection closed loop feedback function
  • Holding pressure switching point accuracy of 0.01mm
  • Packing pressure accuracy of up to 0.1%
  • High-speed rigid filling, to eliminate floating phenomenon
  • Prevent the drawing function
  • A variety of peripheral equipment chain function
  • Equipped with peripheral equipment power outlet
  • With robot centralized terminal block
  • Hopper holder moving function
  • Equipped with resin feed tube holder
  • Equipped with adjustable height white iron trough
  • Equipped with a perspective control water divider
  • Equipped with cooling water quick connector
  • The machine is neat and without any pipe exposure
  • Than the same level of oil-saving 25% to 60%
  • Than the same level oil machine to save cooling water 70%
  • Equipped with 10.4 "color touch screen
  • PID automatic temperature adjustment function
  • Japan's Mitsubishi control system
  • Equipped with wear-resistant material pipe
ELECTRIC INJECTION UNIT
Screw Cylinder Type A B C D E
Screw Diameter mm 18 20 22 25 28
Screw Stroke mm 72 80 90 100 112
Theoretical Injection Capacity cm3 18 25 34 49 69
Injection Capacity (PS)g 16 22.5 30.5 44 65.5
Standard Injection Pressure
(Max.)
kgf/cm2
(psi)
2514
(34945)
2514
(34945)
2493
(34652)
2210
(30719)
1900
(32025)
Holding Pressure
(Max.)
kgf/cm2
(psi)
2263
(31455)
2263
(31455)
2243
(31177)
1989
(27647)
1700
(28828)
Injection Rate cm3/s 81 94 98 98 126
Injection Speed mm/s 320 300 260 200 205
Injection Unit   44B 55B
Opening Injection Pressure
(Max.)
kgf/cm2
(psi)
2520
(35028)
2500
(34750)
2500
(34750)
2174
(30218)
2120
(29468)
Holding Pressure
(Max.)
kgf/cm2
(psi)
2268
(31525)
2250
(31275)
2250
(31275)
1956
(27188)
1908
(26521)
Injection Rate cm3/s 127 132 136 147 153
Injection Speed mm/s 500 420 360 300 250
Injection Unit   75B
Plasticizing Rate kg/h 13 17 21 23 35
Screw Speed rpm 375
Nozzle Touch Force kgf 1500
Cylinder Temperature Control   Nozzle x1 / Cylinder x3
(PID)
HYDRAULIC SERVO CLAMPING UNIT
Mechanism   Hydraulic
Ciamping Force t 50
Opening Stroke(Max.) mm 200
Min. Mold Height mm 180
Daylight Opening(Max.) mm 380
Distance Between Tie-Bars (HxV)
mm
485 x 315
Platen Size (HxV)
mm
670 x 500
Mold Size(Min.) (HxV)
mm
240 x 240
Ejector Type   3 points
Ejector Force kgf 2700
Ejector Stroke mm 40
GENERAL
Machine Dimension (LxWxH)
m
2.36 x 1.26 x 3.23
Machine Handling Size (LxWxH)
m
2.69 x 1.26 x 1.99
Machine Weight t 3.6