SRB-A-2S, the two shaft type semi-automatic, multiple functions rewinding machine
Suitable for rewind aluminum foil and PE, PVC cling film.
The mother roll available width is from 200-500 mm. The finished paper core's I.D. is from 25-50 mm.
This model is carried a brake system, controls the brake power accurately.
Users can check the data of brake output and single product weight anytime.
SRB-A-2S is able to set prior deceleration points of every speed level.
Users only need to adjust rewinding speed afterwards.
Machine will regulate deceleration points automatically by the settings.
It has automatic functions of cutting and fixed length feeding.
Users will thread the material onto paper core more convenient.
The whole machine is combined of electronic control, carried with electric motor system;
enable more precise and quicker shaft-changing movements.
While finished rewinding process, the rewinding shaft will back off by itself.
Users can switch to the automatic mode which start machine automatically after shafts are pressed down.
Automatic cutting, automatic shaft-changing and shaft pressing,
users just need to load & unload products after press start button.
Welcome to consult machine with us. We will at your service.
Raw Material | Aluminum foil / Cling film |
Mother roll core diameter | 3” (76 mm) |
Max mother roll diameter | 700 mm |
Mother roll available width | 200 - 500 mm |
Material thickness | 9 - 20 micron |
Length of the finished rolls | 5 - 1000 m |
Finished roll outer diameter | 230 mm(Max.) |
Finished paper roll inner core diameter | 25 - 50 mm |
Finished paper roll length | 205 - 520 mm |
Speed | 500 m/min (Max.) |
Installed power | 3.5 KW |
Compressed air | 0.5 - 0.8 Mpa |
Power supply | 220V, 50Hz, 3ph |
Dimensions L x W x H | 1550 x 1500 x 1330 mm |
Net weight | 400 kg |